Why washing machine is gaining too much or too little water in the wash : Nedolya overflow and what to do

Speaking about the problems faced by owners of washing machines, can not be avoided is a rare type of fault, namely,an incorrect set of water.For different types and stages of washing fabrics need different amounts of water.So when we set the wash program, the machine itself determines how much water you need to dial.

If at the end of the wash, you got out of the drum badly stretched or warped things are likely to aggregate "missed" with the required amount of water.On why the washing machine is gaining too large or small amount of water and how to cope with this problem on their own, read our article today.

consider various options for problems in which stiralka "wrong" with the necessary volume of water for washing.

This happens when the connection of washing machines perform amateurs.According to sanitary standards of the drain hose must be connected not just to the production of sewage and to the siphon, which should be located at a height of about half a meter from the floor.If you ignore these rules, the unit will not be able to dial a full tank, so the water will go all the time.

Priming valve (it is also called inlet valve) is responsible for filling the water tank in the right quantities.It is driven by a voltage supplied to the it, which creates an electromagnetic field around it.Under the influence of the electromagnetic field filler valve rises, flowing water.As a result, voltage drop may jam the valve in the open or closed position, and then set the water will occur either indefinitely, or, conversely, stopped completely.

This device is also called a pressure switch or water level switch.As you might guess, it is necessary to control the amount of water in the tank.Depending on the model of the washing machine, the sensor can be configured in different embodiments, but the vast majority of such devices operating on principles of electrical engineering.The sensor records the pressure that makes the water column and, building on these data, determines the level of water in the tank.If the water is less than it should be, she gets, and if more - merges.Breakage of the sensor leads to the fact that the washing machine can not evaluate the current level of water, and therefore begins to endlessly fold or draw water.

determine the correct connection is possible, making sure how the device drain.If in the process of spinning you hear the murmur of the water in the pipes, so the connection to the sewage produced incorrectly.In this case, you need to reconnect all over again, taking into account sanitary norms.Avoiding errors is possible if to seek help from a professional plumber.We, in turn, offer a look at a small video tutorial that will help to connect the sewer system to the machine or to correct existing errors in the field.

Availability can be checked if to take it from the washing machine.Alternately, apply a voltage to each of its coils.Defective valve must open and close under stress immediately after the cessation of feeding.If after closing the valve continues to leak from it water, then it needs to be replaced.How to do it correctly, see the following video.

sensor may no longer respond to the pressure of the water, if it is weakened by the formation of blockages.So you need to check all the possible weak points of the washing machine for the entry of foreign objects, clusters scale, residues of detergent, flying dirt and grease.Any found blockages should be removed.If this is not the case, and in the sensor, it will have to be replaced.From the following video shows where the item and how to remove for replacement.

• reason that the washing machine does if water overflowing Nedolya, can be not only in the aggregate, but in the sewer pipes.If the pressure in the tube above the normal water drawn from the tank, so it remains empty.If your house has such a problem, it is advisable to mount the drain hose in the special valve to prevent the forced draining.
• Many modern models stiralok there is a function that protects the tank from overflowing.If the water in the tank is more than normal for a given wash program, an intelligent system starts the drain pump, which removes excess water.Read the instructions to your machine - perhaps she, too, is equipped with this feature.