Ennobles doorway

most often in older homes doorway has a dull rectangular structure.

In order to make your home more interesting, stylish and modern, many are asking: how ennobling doorway?

When repairing old turnkey apartments can change the shape of an old doorway to a more modern arch, which today is done in an apartment with a new plan.

To do this, you need to prepare the tools that may be needed.It is necessary to prepare gypsum board, pencil, screws, jig saw, nails, rail, arched angles, vertical guides

First you need to calculate the doorway to the arch.Above the door, mark the height of the arch of the future opening, to which is added another 5 cm. After this you can proceed to the selection of material for the arch.

For arches can approach the tree, styrofoam, drywall.The latter material today is most often used when conducting internal repairs.

Photo:

After all materials to be purchased, and the workers mixture prepared you can start to work on the opening.

Before ennoble the doorway should be thoroughly extinct sizes horizontal guide.

This includes the opening width and the distance from the ceiling to the bottom of the horizontal track.

The data are transferred to a sheet of drywall.The radius of the arch in this case will be equal to the width of the opening.

compasses in this case may be a rake with a nail at the end.With its help on drywall arches carried circle.

then cut the arch of giposkartona using a jigsaw.Likewise, the second arch is made of giposkartona.

Thereafter prepared arched structure are mounted on the horizontal and vertical rails with screws.

After installing the arches can move on to the slopes of the arrangement.

To do this, you need to take a guide profile, attach it to the inside of the sheet on the circumscribed circle.They are doing the same operations on the other side of the arch.

need to trace that all the guides on circumference matched to obtain the correct opening.

Video:

After that connect the halves of the arch a small segment of the profile.It is inserted into the guide.

After this, the creation of the arch can be considered practically complete.It now remains to be done putty and paint work.

must be remembered that the slope angles need to decorate the arched areas.This will protect the arch from being damaged.