Construct septic tank of their own hands of cubic

In the event that a private house does not have a direct connection to central sewer system, a way out of the septic tank can be of cubic own hands.

For many years to equip the individual sewerage system for private homes or cottages can be only in the presence of the sump.

Despite its simple device, though there were certain difficulties in further exploitation.

First of all, any sump must be cleaned periodically, and besides, even if it is located away from home, an unpleasant smell coming from it, extends over a long distance.

worth noting that the latest developments in the regeneration of an autonomous sewer system in the country or in a private home, allow to cope with all these problems at a minimal cost.

In recent years, widely used all sorts of septic tanks, which are a perfect alternative to cesspools.

The main advantage of such systems is that the scheme of the device allows you to clean all sewage to the point that they become suitable for watering the beds in the country.

In this case, the best option is a septic tank of of cubic, who can make each and every problem.

design and features

Average evrokuby is a certain size plastic container, which is capable of withstanding pressure and resistant to aggressive media.

In turn, a septic tank, which is assembled with the help of cubic, is a structure consisting of several such reservoirs, in a special way connected to each other.

septic tank device of this type requires a special vent valves, and pipes, which will move the liquid sewage.

use of cubic everything for a septic tank to minimize investments and made fit for further technical use all incoming wastewater.

If the construction of a septic tank scheme assumes its insulation, the use of sanitation in the country, and the house will be all year round, even in sub-zero temperatures.

scheme simple septic tank of this type of device is shown in the photo below.

also homemade septic tank, which is equipped in the country of of cubic, does not spread on the territory of an unpleasant smell.

This design has a high degree of sealing and reliability, it is not afraid of corrosion and the effects of various corrosive media.

addition, properly collected from the septic tank of cubic own hands does not require periodic pumping, which means it can be operated without the need for maintenance.

Work on installation of cubic may be carried out independently, without the involvement of construction machinery and special equipment.

worth noting that evrokuby a septic tank can be installed in almost any soil, in addition, has no value and the depth of the passage of groundwater.

For more information on how to build a septic tank of cubic of their own hands, you can see in the video posted below.

Video:

How to collect?

Because of cubic homemade septic tank can be assembled in the country as a two-chamber or three-chamber type.

most widely considered the construction of a septic tank, consisting of two separate tanks.

His device requires two of cubic appropriate volume, as well as all the necessary additional components and pipes.

It is desirable to have on hand a high quality sealant, welding machine and grinders.In most cases, standard evrokuby intended for private homes already have drainage holes.

These holes should be carefully sealed using a sealant, which is screwed on the lid.Further, one of the tanks to place the special T-piece.

You can do this by creating with the help of Bulgarian additional technological holes.Exactly the same hole must be made on the second container.

Next pipe installation is carried out, through which all the sewage waste will flow into evrokuby.

This pipe must be carefully sealed.A prerequisite of any septic tank is adequate ventilation.

For these purposes, each tank should make a small hole through which passed special ventilation pipe plugs.

After that, you can proceed to the arrangement of the overflow system, which on the one of cubic should make a hole a little higher than the other, and connect them with each other using a tee and pipe piece.

Since this type of device does not imply a septic tank pumping operation period, respectively, and there is no need to equip special valve for this purpose.

following is firmly fasten together both tanks.This can be done by means of reinforcement, binding wire and welding machine.

As a result, should get a design, as in the photo posted below.Septic self assembly process of this type is shown in detail in the article video.

installation and assembling

Under the arrangement of the septic tank, consisting of a cubic containers should be properly choose a place in the country, at the same time not too far from home.

better if the place would be in an open area and well away from the flow of groundwater.

defined the place, it will be necessary to measure and mark, and only then proceed to the excavation.

addition of cubic pit for themselves, it will be necessary at the same time to prepare the trench for the pipe and drain.

In the event that there are no nearby groundwater, at the bottom of the pit will be enough only to arrange a pillow of sand and gravel.

Otherwise, the bottom of the pit will be necessary to pour concrete.This is followed by gently lowered into the pit of the design itself of cubic and connect it to the sewer system, running from the house.

more on this narrated video posted below.

Video:

also design team must be connected using a special tube to drain well, which will go past sewer cleaning sewage.

This outlet pipe experts recommend to provide a check valve which prevents the ingress of water into the septic tank different in the opposite direction.

top of the device and all of its side walls must be warmed.This can be done using the foam sheets.

Next stacked on top of the septic tank protective boards or sheets of corrugated board, which will prevent the deformation of the entire structure as a whole.

This is followed by two cubic containers filled with water and backfill the trench with soil.

should also be careful to arrange the upper part of the septic tank, while not forgetting, if necessary, to provide easy access to the construction of a septic tank.

process of installation of a septic tank on the basis of cubic detail revealed in the video, which is available above.

Tips and tricks

Septic collected from of cubic, will be effective only if all the work on its arrangement will be made in accordance with generally accepted rules.

cooking pit under evrokuby be using a waterproofing layer.This will avoid negative consequences in critical situations.

In addition, it is recommended to carry out waterproofing in a ditch, intended for laying sewer pipe.

Particular attention should be paid to the ventilation system, septic tank, because of its proper functioning depends largely on the successful work of the device.

Despite the fact that evrokuby able to withstand a certain load, it is recommended not to overload them and fill to the upper limit.

For convenience, this type of septic tank should be equipped with electric compressor that can supply oxygen tanks.

This will speed up the process of decomposition of aerobic bacteria, and accordingly themselves evrokuby be cleaned much faster.

In the operation of the septic tank of this type is not recommended to avoid getting into evrokuby various non-biodegradable items such as polyethylene, cigarette butts from cigarettes, metal objects and more.

also not advisable to fall into the tanks petroleum products, all kinds of solvents, drugs and other chemical waste.

It is undesirable to allow discharge into the sewage system of a large volume of liquid at a time.This can lead to overflow tanks and septic damage in general.In

if not equipped with a special septic electrocompressors, then over time it will have to perform manual cleaning or using scavengers.

If the septic tank of this type are not used for a long time, before its subsequent operation should be added to evrokuby special biological preparations, which include micro-organisms, accelerating sewerage water.

Also, if the septic tanks are only in the summer, for the whole winter season should conduct its conservation.

Video:

To do this, all the tanks must be completely empty the liquid and water and cut off all the valves are available in the system.

If this system is operated in the winter season, the container should not be filled up to the upper limit.

At low temperatures, strong strength characteristics of the plastic from which made evrokuby significantly reduced, and the overflowing tank can simply crack or warp.

In any case, the work of the septic tank of this type must be constantly monitored and checked.

Compliance with the rules and guidelines at its operation will avoid many problems and to extend the total period of service as of cubic and the system as a whole.