Proper installation of a hood above the gas stove

assume that all disputes and doubts about what kind of hood you need, have been resolved.

Where will leave the air - in the ventilation shaft or, passing through the filter is returned to the purified state back into the kitchen, too, it is already a closed issue.

Made all defined measurements and drawing performance.

then left to decide the most important task - to install a hood above the gas stove.Let's look at how to better and easier way to do this.

What you need to do before installation?

hood to be effective and safe in the work you need to install it correctly.

The first thing that must be provided - a separate electrical outlet, and the very ground the hood to prevent motor burnout in the case of voltage drop.

Now you need to decide on the suspension height of the cooker hood.As a minimum height of specialists recommend 65 cm for gas cookers and at least 47 cm for electric cookers.

Installing hood in the kitchen is not too difficult to see, be sure to watch this video.

Video:

upper value is not limited, but remember, the lower the hood above the stove, the better the air is removed above the stove, and the increase of this distance will require increased power extraction several times.

is also necessary to take into account the growth of those who will be more likely to use the hood in order to make it convenient to reach for controls.

Even at the stage of selection must take into account the width of the hood.It should be equal to the width of the slab or greater.

and mounting plate must be clearly under the hood without mixing in hand.

How to install the hood over a gas stove?

Installing the kitchen hood is reduced, usually by hanging it on the wall, so you need to make a clear-cut measurements, apply the exact markings with the level and pattern and carefully drill holes in the wall and beat them dowels.

Then, set props, bolted and installed hood.By means of adjusting bolts strictly adjusted to a horizontal position.

important factor is the mounting vozduhoootvoda system should pay attention to the following: a duct for kitchen hood must be of the short and straight line segments, the number of elbows should be minimal and when changing the direction of the pipe is necessary to use the knee with a large bending radius.

Video:

Note also the inner surface of the vent - it should be smooth.

better to use a box of thick-walled PVC (round or rectangular).

Installing hood over gas stove requires certain skills and knowledge, as well as carrying out specific measurements to determine the air flow and exhaust vent system performance after installation, so you should use the services of professionals.