laminate stacking technology diagonally

Laying laminate diagonally - is one way to give a floor surface of a sophisticated look.

Unusually located in the interior of the line lead the eye and form the basic impression of the room.

If the interior of the room to lay laminate flooring along the wall, you can visually enlarge the length of the room.

make the space wider allow laying laminate drawn across the room.

laminate Laying diagonally will divert view in corner of the room, to where go the coating line.

alternating light and dark strips during installation, the floors in the interior can be more expressive.

diagonal styling is indispensable in the interior of the narrow rooms and rooms with a non-standard layout.

After all, if in the narrow space of the laminate planks are laid directly parallel to the walls, the attention is focused on them.

In diagonal installation takes place all the way around, attracted attention to themselves the layout itself.

is especially true of the angles at which the focus is due to what they can do in the interior of the center of the composition.

In this case, as seen from the photo, the shape and size of the space are in shadow.

Considering laminate assembly defects on the diagonal must be said that they are no more than the installation of panels on standard technology.

First of all - this is a great amount of material that is literate, installation can be excluded.The second - the process itself, according to some experts, more time-consuming.

Features laminate laying diagonally

the question: "how to lay laminate diagonally" can answer that this is not nothing complicated technology.

laying process differs little from the standard method, which means that the alignment of the main floor and the substrate arrangement has not been canceled.

The only thing that is recommended to pay attention before installation - it is to choose the location of the dice on the diagonal - relatively light.

Stela laminate diagonally necessary so that the rays of light coming from the windows, scattered along the length of the straps.

This situation will allow the visually hide butt joints and floor covering to give the form a single web.

Furthermore, stacking the laminate should be diagonally at a certain temperature.The best option is considered temperature 20-260S.Thus

humidity should be in the range of 45% to 75%.

exclude the possibility of deformation of the individual laminated plates can be, if the material is to leave for a day in the room where the flooring will be held.

Stela laminate planks with their hands, it is better with the help of tamping - rectangular bar of wood that will go perfectly panels into each other.

scheme laying laminate can be executed in two variations: start from the center of the room or from one of its corners.

Equipping laminate from the middle of the room, it is possible to reduce material consumption, which means that the above mentioned disadvantages will be reduced by one point.

If you put the first row of planks in the middle, you get two workers of the field, resulting in improper die for one side can be used for laying on the second side.

work will be more effective if collect rows alternately, the one, the arc of the central line.

This extensibility is necessary to control the gaps between the joints and the laminate and the wall.

Video:

It is appropriate to use the simple tools in the form of wedges - for positioning in emerging gaps and maintain the slats in the desired geometric position.

And if along the walls of the plinth will be located, then the gaps at the door will be much more difficult to hide.

It is because of these ugly gaps laminate stack without thresholds.More information about the treatment process will allow the seams video story.

technology of laying laminate without thresholds

Since the issue laminate portions near the opening harder than all the rest of the room, you can use the technology, which will put the flooring without thresholds butt.

For this to be installed in rooms laminate for reciprocally in only one direction that will remove the boundary and increase the space.

In addition, to make the original flooring without thresholds obtained by combining flooring.

example, laminate, laid diagonally, good aligned when passing thresholds with ceramic tiles.

Often this separation of the living area can be seen in the hallway with a bathroom or kitchen, as proposed photo.

ideal for sealing joints of floor flooring, made without thresholds, it is recommended to use an artificial cork that their action resembles assembly foam.

accurately fill gaps with the help of a construction pistol, with their hands cut off excess material after hardening.

Sealant is water, tends to expand and contract, fully adjusting to the laminate behavior.

add detail above material will allow the video device on the floor flooring without thresholds.

How to make payment of the desired amount of the laminate?

Calculation laminated boards when laying diagonally different from the calculation of the amount of material needed for mounting directly.

For the second method is sufficient to determine the area of ​​the room and divide the resulting number by the size of one of the board, will only have to round the result found.In addition, 7% is taken for scrap.

Calculation of material for laying diagonally will require a completely different mathematical formulas.

Video:

By multiplying the result of the length and width of the room, add the result of multiplying the width of one panel at 1.42 and the width of the room.

Mathematical calculation is as follows:

(AShCD) + (1.42 x width of the AU panel unit)

Where:

• speakers - the width of the room;
• CD - the length of the room;
• 1,42 - square root of two.

As an example we take the space with an area of ​​5x7 meters and a width of one laminated panels 0.1 m, at length - 1 m

The calculation is as follows:

• Area: 5x7 = 35 m 2.
• area replacement products: (1,42h5h0,1) = 0.71 m 2;
• area of ​​one panel: 0,1h1 = 0.1 m 2.

required values ​​into the formula:

• 35 + 0.71 = 35.71 m 2 (the total number of items).
• 35,71: 0,1 = 357,1 units.

rounded to 357. The above calculation allowed us to determine that for laying laminate diagonally in the room must be 357 pieces of 5x7 boards.

Rules laminate mounting diagonally

Stacking laminate flooring diagonally to get a quality result is obtained only in the case of compliance with all installation instructions.

Step by step instructions can have the following action plan:

1. determines the direction of laying planks, often they begin to mount their own hands with the far left corner.The optimum angle is one of 300 to 450;
2. wedges size of 10 mm is placed along the walls, between the edges of walls and products.Thus, the rule snug fit boards to them and to form expansion joints;
3. Laying laminate diagonally spend staggered.Since the walls are not all buildings are connected at an angle of 900, the first two and even three rows of the laminate must be fit under the existing angle.

When assembling care must be taken to the edge of the final elements of the approach laid its shape under the command of the subsequent strips.

How to perform sawing laminate:

• measure from the edge of the penultimate step before the wall element (for one side bracket), not forgetting the existence of the expansion joint;
• using a pencil, make a mark on the laminate;
• conduct measurements for the second opposite side of the strap and make a mark with a pencil;
• marks the point interconnects line and it sawed piece electric jigsaw.

Sawing is performed on the reverse side of the part that will prevent damage to its outer coating.

Among other recommendations about laying laminate diagonally, it is worth noting such important issues as the optimal length of the board acquired and time after which you can enter in the coating operation.

Video:

single standard for laminated boards length does not exist among the common options 1260 mm and 1380 mm, and has a length of about 1800 mm.But

acquire too long panels is not necessary, as will subsequently be difficult to sustain in the process of laying the geometry of each element.

move on only mounted laminate surface can be provided by mounting the panels interlocks.

If the laminate was put on the glue, you must wait a while until the adhesive dries.Typically, the manufacturer indicates that the period allowed for the packaging.

In this article you will find useful thematic video material, which will provide more detailed information.