Build Daily

Calculators

August 12, 2017 18:05

Calculator for bricklaying solution

click fraud protection

area walls (m2)

size bricks and masonry:

single brick, masonry brick in 0.5, wall thickness - 120 mm single brick, masonry brick in 1,wall thickness - 250 mm single brick, masonry 1.5 brick wall thickness - 380 mm single brick, masonry brick 2, wall thickness - 510 mm single brick, masonry 2.5 brick wall thickness - 640 mm Brick bastard, masonry brick in 0.5, the thickness of the walls - 120 mm bonder brick, masonry brick in 1, wall thickness - 250 mm bonder brick, masonry 1.5 brick wall thickness - 380 mm bonder brick, masonry brick 2, thicknesswalls - 510 mm bonder brick, masonry 2.5 brick wall thickness - 640 mm double stone, masonry brick in 0.5, wall thickness - 120 mm double stone, masonry brick in 1, wall thickness - 250 mm double Stone,masonry 1.5 brick, wall thickness - 380 mm double stone, masonry brick 2, wall thickness - 510 mm double stone masonry 2.5 brick, wall thickness - 640 mm in expanded clay blocks, the size of 200 * 200 * 400,wall 20 cm

From the qualitative characteristics of cement mortar depends on the strength and durability.It is therefore important advance purchase all the necessary ingredients for its preparation.Calculation of the solution to the brickwork is done on the basis of determining the consumption of cement, hygroscopic properties which require precision and speed in order to avoid the unsuitability of the preform blend.

solution Calculation of masonry depends on the project, such as bricks and cement branded toiletries.As a rule, for the construction of walls made of bricks, a mixture whose hardness varies within the meaning of M50, M100.

scheme for the solution calculation bricklaying

Initially, the preparation of cement-sand essence involves determining the desired cement its brand, the choice of which depends on the expected strength of the finished composition.Her class should be two to three times greater than the hardness of the mixture.So, for cement mortar, M100 hardness, it is necessary to buy branded cement properties M200 or M300.The most rational solution would be to use the brand M400.Its specific percentage in the preparation of the mixture achieves the desired rate of strength.

next step involves calculation of the amount of the solution for masonry, which is determined based on the flow rate of 0.25 m3 per sq.m. masonry.

As practice shows, for masonry wall, one brick thick, need 0.21 cubic meterssolution.Clutches of two bricks involves using up 0.23 m3 cement-sand mixture.It is important to take into account, irrespective of the type of solution used (standard three-way, with a dash of lime or plasticizers) volume flow rate will be the same.Thus, the amount of the mixture depends on the structural characteristics of the brick.Hollow variant significantly increase the consumption of cement mortar.

Calculator solution to allow the clutch to make calculations regarding the total volume of the cement mixture.The reliability of the result depends on the accuracy of measurements indicate the size of the walls, windows and doorways.The presence of concrete walls belts provides the calculation of the height of the common measurements.

for calculating parameters necessary to set the length and height in meters walls, masonry thickness, which is determined based on the thickness of the brick.

Building online calculator enables quick and easy calculation rules grout.In addition, the definition of consumption brickwork allows to navigate in the value of the masonry and to make the initiation of the required budget for the construction of buildings.

instagram viewer

Categories

Latest Blog Post