The cast-iron stove for baths Hephaestus : diagram, description , dignity

to heat the steam room or sauna, different heaters.One such device performs a cast-iron stove for a bath, "Hephaestus".This manufacturer has proved the high quality of its products and the efficiency of its use.On the features, advantages and connecting the oven "Hephaestus" talk on.

Featureand the advantages of using cast iron stoves "Hephaestus"

bath - quite a popular form of recreation, which is in high demand and high popularity.Bath not only helps clean the body, but also helps to improve the health and emotional state.Constant visits to the bath helps to improve blood circulation, blood pressure and the immune system.

But, the quality of the bath depends on the furnace used to heat it.In ancient times, the most popular were the brick ovens, but now, with the development of technology all furnaces are used most often made of steel or cast iron.

Wanting to save money on the construction of the furnace to the bath, sometimes it turns out that the traditional brick oven far more costly cast iron.

Among the advantages of cast iron stoves "Hephaestus" release:

• strength - as the composition of the material allows the stove to withstand the load, it is resistant to mechanical damage, and durable.
• Furnaces "Hephaestus" has a simple structure, which allows not to resort to the help of experts, in the process of installation.
• possible option of finishing the front of the furnace by means of bricks or other materials, although some owners do not perform this procedure while the oven is also a good appearance.

• Cast iron furnace Hephaestus different mobility and ease of removal.
• Moreover, these ovens are versatile, as not only heat the room, but the heat and water for bathing.
• cast iron stoves provide the ability to adjust temperature in accordance with the desire of people taking bath procedures.
• While oven is large enough weight, their transportation is not a problem.
• If you maintain a small fire, the stove work lasts for eight hours.

Compared oven, made of steel, brick and iron, then of course, the last option wins.Cast materials are best conductors, since they are rapidly heated and give off heat to the room.In addition, the duration of the operation of a cast-iron stove is quite high, as it is very rare cracks.In contrast to the brick oven, which takes place after a time the crumbling bricks, requiring a call specialist to replace it.

Cast iron ovens are more resistant to the action of frost and low temperatures.If you leave a cast-iron stove for the winter in unheated premises, its qualitative characteristics remain unchanged.Comparison

under heating rate, also benefits the oven made of cast iron.Within twenty minutes after kindling, cast iron stove has fully warmed up and starts to heat the room.Brick oven must first heat up themselves, but only after the heat of the environment.

Cast iron stove is more compact than the brick, it also makes it more comfortable to use.In addition, for the installation of a brick kiln requires additional planning, installation of foundation and conduct other construction works.it is not necessary to equip the foundation for the installation of the iron furnace.

Another advantage of the iron furnace bath is its safety.Formed on the surface of the brick kiln cracks may lead to a fire.In the iron furnace cracks can not be, it is quite tight and safer to use.

Compared with steel cast-iron stove, it is still the first option wins.Although steel is stronger and more durable, but in term of operation is considerably inferior to cast iron.

According to susceptibility to corrosion, cast iron stove is more resistant to this process.During operation, and strong heating furnace, steel furnace prone to deformation, cast iron is more stable in front of her.

cost iron furnace is less than the bricks of the furnace, but higher than that of steel furnaces, although the quality of both species it wins.

now proceed to consider the disadvantages oven made of cast iron.Heated by cast iron stove for longer than steel.In addition, it needs a wall because if pour water on its surface, may cause cracks.

To ensure continued space heating steel or cast-iron stove, heating is required by a smoldering wood.For a furnace of bricks just enough to heat it and then it will gradually release heat into the environment.

duration of operation of the furnace of iron by 40% higher than that of the steel furnace and the efficiency reaches 85%.This kiln can operate smoothly up to eight hours, during this time do not need to enclose it in the wood, which saves time and improves the comfort of use.

furnace cast iron bath for "Hephaestus" - features and manufacturer

Cast iron stove "Hephaestus" are made using special technology, which implies spilled material on quartz sand forms.Due to this fact, a surface on which there are no sinks, cracked or junctions.Furnaces "Hephaestus" is entirely manufactured in the Russian Federation, all the data components of furnaces distinguished by quality and reliability.

The variant configuration iron furnace lining materials for them, such as natural stone, talkohlorit.There are several series, which allow to revet a cast-iron stove "Hephaestus" is:

• Optima;
• President;
• "Russian bath".

first variant is characterized by a lining of open boxes, which is intended for filling the bath stone.The other two options involve the equipment of the closed box.In addition, the furnace features include mesh, which are laid stones.

There is a wide variety of patterns and shapes of cast iron stoves.The designers of "Hephaestus" is constantly improving products, coming up with the original function of the cast-iron stoves.

studying on iron furnace "Hephaestus" reviews such its benefits should be made:

• durability - manifested in Anti-corrosion, stability to high and low temperatures;
• addition of chromium makes the cast-iron stove more heat resistant, so the duration of its operation is several decades;
• through the use of innovative technologies, cast iron stoves "Hephaestus" have a very high level of efficiency, which is more than 85%;
• furnace design is also innovative development of the company, which has no analogues in the world, the stove has three trapezoidal cut-outs that help increase the useful heating area;
• when compared to cast-iron oven, "Hephaestus" with the same device, it is characterized by the presence plamenegasitelya that promotes flue gas movement on each side of the furnace wall, this gives them extra heating, contributing to an increase in efficiency, so the oven "Hephaestus" reasonably uses fuel and verylong cools;
• furnace wall thickness of from 1 to 6 cm, are equipped with vertical stiffeners convection S-shaped ribs that facilitate zavihrevaniyu rising hot air, thereby making it even hotter.

In addition to these advantages, cast iron oven, "Hephaestus" is characterized by very rapid heating or steam bath facilities.Due to the unique design, the oven is capable of self-heat to 750 degrees, while the temperature inside the smoke it is only 350 degrees.

Furnaces "Hephaestus" was able to retain heat for a long time.Large mass ovens contributes to its long-term heating and maintaining the temperature for several hours.

That cast iron products "Hephaestus" was able to provide a room with steam bath light, which is very useful for human health.

All components that are components of the furnace, "Hephaestus" made exclusively from high grade cast iron.

If you make a choice between a cast-iron stove "Hephaestus" and its gas or electric counterparts, it is better to choose the first option.Since using an electric stove does not feel the atmosphere of smoke, wood combustion and turns artificial bathing.To install the gas stove in the bath requires coordination of multiple services, permits and other documents.Firstly, this process takes at least several months, and secondly, require considerable financial investment.

High-quality cast-iron bath furnace "Hephaestus" allows you to heat the room adjacent to the steam room, with a man who heats it has the opportunity to enjoy the beauty of an open fire, the smell of wood and smoke.

furnaces Portals "Hephaestus" have an original finish with artistic casting, the door is made of heat resistant materials, and they are glazed, so the beauty of the fire is visible to the naked eye.

The primary cladding material for finishing the cast iron furnace "Hephaestus" is used soapstone substance that contributes to long-term retention of the furnace temperature.When choosing natural stone finishes, the buyer will receive protection from the effects of infrared rays, which comes from the fiery furnace.

Finish soapstone can increase the heat capacity of the furnace, as this stone helps to improve the thermal conductivity and heat capacity of the unit.

Choosing a President facing a series or "Russian steam" possible option Optional oven with internal paronakopitelnogo box.The material for its production in favor of stainless steel.The duct active set stones bath, from which steam is not able to penetrate into the gap between the sheets.

Finish using soapstone can not only embellish the appearance of the oven "Hephaestus", and is characterized by the presence of the therapeutic properties, which help to improve immunity, help the body to resist the flu, have a positive impact on the general condition and health.With the coil removed headaches, fatigue, improves blood circulation and treat diseases associated with the respiratory tract.

Quite an important element of each bath is the shape and location of the stones.The stones are placed starting from the central portion.The first to put the biggest stones, top fold smaller stones.

main condition for when selecting stones in a bath of rounded form.It is thanks to her, the stones are capable of for a long time to save energy, resulting from the fire.

The total weight of stones depends on the size of the sauna room.For example, for the arrangement of the steam room, 15 square meters will require 150 kg of stones.

Another important part of the bath is the chimney, if it is installed correctly, the heat will be well stored and distributed.Otherwise, any problems with the speed and amount of fuel buildup.

All cast iron stoves "Hephaestus" equipped with iron chimney starter, so the problems associated with the breakdown of this part of the chimney, are excluded.

basic models of cast-iron stoves "Hephaestus"

• "Hephaestus P B 03" - is a small oven, which is intended for the heating steam to the area of ​​23 m².Material production - heat-resistant cast iron.This oven is designed for heating baths or steam rooms, it is a convection device operating on a wood or briquette fuel.The combustion chamber is equipped with a special flame divider, which contributes to a better distribution of heat on the stove surface.Have remote portal allows kindling in the nearby areas.In addition to a complete set of the stove supplied forged mesh decorative purposes.It is intended for laying stones and increases the length of the furnace for several tens of centimeters.

Furnace supplied to the buyer in a flat packed.This process simplifies the transportation of the oven "Hephaestus".Installation furnace takes much time and requires no special skill, so the additional attraction of experts is not needed in the process of mounting.In addition, the manufacturer provides a complete sealant with high-temperature characteristics, which provides additional reinforcement joints between the steel box for ash and furnace.The originality of the design allows the furnace to achieve high performance.For fire safety plamyatushiteli are capable of reducing the temperature within the furnace and a chimney, thereby reducing fuel consumption.

• "Hephaestus P B 04" - this model furnace is adapted to finish under a brick.It is able to heat the room bath or allied space, up to 14 m².The steam produced by the furnace, and the individual is comfortable combines a moderate temperature and humidity.This oven is a convection heating device, as fuel for the wood which is used.The furnace is a heat-resistant and resistant to corrosion.The wall thickness of from 1 to 6 cm. In addition, the oven is characterized by a top connection to the chimney, detached location and the ability to load up to 180 kg of stones.