Build Daily

Wiring

August 12, 2017 18:07

What should be the wiring in the new apartment ?

click fraud protection
Hello dear readers of the site "Sam Electric"!Today we would like to tell you about how to spend the wiring apartment with his hands, if you are the proud owner of new buildings.Installation instructions will be provided in the form of useful tips for choosing and completing their self-installation.

Contents:
  • Where to start?
  • Electrical work

Where to start?

first step is to create a wiring diagram of the input to the final points - sockets, switches and light fixtures in each room.Examples of one-room schemes, one-bedroom and two-bedroom apartment we have provided on site.To find them is not difficult.

Apartment- new photo

Further, according to the draft prepared by the need to calculate and choose the appropriate circuit elements.When installing the electrical wiring in the building is recommended to stop the choice on such components as:

  1. three-wire cable, or VVGng NYM, section 3 * 2.5 mm2 for sockets, 3 * 1.5 mm2 for lighting line, 3 * 4 mm2connect the electric stove in the kitchen.
  2. outlets in the bathroom with the IP degree of protection not less than 44.
  3. light switch with illumination.
  4. breaker separately on light line rated at 10A and at the outlet - 16 or 25A.Before the machine is recommended to connect the RCD is 30 mA for protection against leakage.
  5. Junction boxes should stand in every room.Connection wires in boxes - WAGO terminals.On entering
  6. sure to install the machine, which you can turn off all the electricity in the apartment during the repair work.
  7. wire harness in the apartment should be hidden manner, ie,prepared in Stroebe.

Here are the basic elements that you need to buy before installation.Please note that you can not follow our recommendations, for example, to carry out the wiring in a new open pit or select another machine with a nominal value.tips above are general and not specific to the case.

Electrical work

Wiring in new You can make your own hands, and you can call a specialist.It all depends on your personal skills and desires.If you are interested to conduct electricity to a new apartment, we are sure to see the step by step instructions, to which we referred at the beginning of this article.Otherwise, you can hire a wizard that will do everything correctly, quickly and with a guarantee!

Finally we recommend you watch the video, which clearly shows all the stages of wiring, in a new apartment in the home:

How to do your own wiring harness in a new building?

YouTube Preview
Material prepared site http://www.ksplus-gel.ru/

instagram viewer