Glazing in the balcony Khrushchev with his own hands

That glazing of balconies in Khrushchev will significantly increase energy savings, make the apartment warm and cozy, even can not speak.It is no wonder that such a housing option is often called "Khrushchev's refrigerator."

materials for glazing balconies

The first question that should beto begin preparations for the glazing of balconies Khrushchev in their own hands - is the choice of material.There are several options available, which differ in price, performance, load balcony base, as well as insulating properties.The most popular today glazing of balconies in Khrushchev , photos of which can be seen below, is a:

1. PVC windows.The advantages of this solution include a good sound insulation and heat retention, whereby it is possible to arrange the living room in a given area.Among the shortcomings noted the significant weight of the structure, which leads to increased demands for the grounds on which the frame will be fixed (it must necessarily be made of brick or concrete), as well as the relative high cost of the material.

2. windows with aluminum profile .Advantages of this embodiment: easy, compared with PVC windows weight, low price.include reduced insulation performance Disadvantages.

3. windows with wooden frames .Advantages and disadvantages are similar to the windows with aluminum frame, only an indicator of thermal insulation even lower (especially if the frame with a single glass).

addition to the above, provides the following options for glazing balconies in Khrushchev :

• french windows, in which the frames are installed on the entire height of the balcony;
• frameless type.

to choose saydingovye outer skin panels, plastic, wood and battens.If you decide in favor of one or another material, then consider a phased process of glazing itself.

balcony glazing stages in Khrushchev

1. conduct a thorough audit of the condition of the concrete panels and metal elements.Only then decide on the material for windows.

2. Determine whether external glazing variant or classical.We expect the required amount of material.If there is a balcony glazing in the Khrushchev on the top floor, then you have to take into account the additional materials on the roof.A simpler option - perform the visor of galvanizing, more durable and quiet - the roof of the "Onduline" tiles.

3. Complete cleaning of the territory from the plaster, extra items, old frames, if any.As a result, must remain one concrete parapet.

4. In most cases a metal frame in a pretty bad state.He dismounted, and a seat frame made of thick metal profile.Perform this step without welding impossible.But you can prudently do outrigger structure, thereby to increase the total area of ​​the balcony.You can do a wide sill, ordering frame with external element.

5. Mounting frame of metal profiles to the house wall and the parapet.Outriggers also assembled by welding, in compliance with an angle of 45 degrees.

6. The base of the roof is extended by a profile.It is fitted directly on the roof itself for a smooth installation frames.The projecting member, if it is left, it is covered by a visor and a galvanized steel sheet, or any other material.

7. Installation of windows directly on the finished design.If you plan to trim the metal framework, that begin with her.The windows in this case inserted into the last turn.

phased process can be viewed on a video about glazed balcony Khrushchev in .

Before you decide to do this work yourself, it is worth once again to weigh the "pros" and "cons."Since the work is not just difficult, but also dangerous, even without any practical knowledge about the process of better pay specialists for installation, than then tormented by improper and, as a result of damaged materials.If we really want to do work with your hands, stop for interior decoration.It's not as dangerous, but if something is done wrong, it is possible to convert a much smaller financial losses.

Video balcony glazing in Khrushchev