Decorating of fireplace made ​​of plasterboard with their hands

Create fireplace plasterboard not really that difficult, but make it beautiful it turns out not everyone.Therefore, even during the preparation of the draft of the future product is choose the material for finishing with the size and design of the room.Do not forget about the size of the equipment, which will be encased inside.If you have already provided, then finish the fire with their own hands will be easier, and the result will be better.

Step by step instruction Features Fireplace plasterboard

Before starting immediately finishes the process, the productshould prepare - proshpaklevat.After this, the walls are flat and smooth, the material would be better to go to bed, and all joints are perfectly hidden.To proshpaklevat wall you need to do the following:

1. Make sure that all the joints of plasterboard frame glued serpyanka.
2. primer treated surface with a roller.
3. Pour the plaster in a bucket, add water according to package directions and mix until smooth, without lumps.The easiest way to do this with a special pavilion which is worn on the screwdriver.
4. Take two trowel - large and smaller.Apply the mixture onto a large small, distributed evenly along the entire edge of the layer.
5. Start putty applied from the top down, stretching evenly.
6. Align the entire surface and primed.

Now we have to do the most important thing - to decorate the fireplace decorative elements.On our site a lot of ideas, which furnish the fireplace made of plasterboard with their hands is simple and spectacular.Here are some options how to apply the materials and methods can work with them.It is worth recalling that look best products that have top shelf combined with the foot of the fireplace.

1) Finish by using plaster.This option is one of the most simple and accessible, but do not forget further to the corners stick perforated tape for strength.Perform the work will not be difficult especially since you yourself lined the walls.If you select decorative plaster "under the bark", for example, require an additional Venetian trowel or putty knife paint.Apply to be at the lower right corner of the covering is not too large surface, as this type of plaster dries quickly.Field of the layer is applied, wait at least 5 minutes and start to overwrite, creating a desired pattern.Understand that the plaster has dried up and it's time to start the grout can be in appearance - it ceases to shine.

2) Finish with a decorative stone.You can see how it will look trim fireplace with his hands on the pictures in this article.For bonding stone, you can use the grout, mortar or liquid nails.The easiest way to work with the latest version, especially if the size of a small stone.Figure you can create for yourself, but the work should start from the bottom.

on corners bought special corner stone elements.Even despite the fact that different sized stone, watch and step level.If you are working with solutions, be careful that they do not hit the front of the stone.If the material is soiled, wipe it off immediately with a damp cloth.At the end of the entire cover surface Laid varnish to protect it and to make it less on collected dust.

For a more detailed study of the process of working with the materials and find other options for finishing the fireplace with his hands, and videos posted on our website.

Video finishing the fireplace with his hands