Soundproofing a ceiling in the apartment

quality sound insulation of the ceiling in the apartment is a lot of dreams of many households.Noisy neighbors often do not allow the owners living space comfortable to relax and spend their leisure time.To solve this problem requires careful preparation: the purchase of special soundproofing materials, consumable materials.Contractor must also be aware of the decrease in height of the room due to the installed mounting frame and two layers of gypsum sheets.

materials for sound insulation ceiling

amount of materials is calculated according to the area of ​​the premises.Pre buyer needs to know not only how to make the sound insulation of the ceiling in the apartment, but also what mistakes should be avoided.In order to perform the tasks will help to understand the accompanying video and photos.

for quality of work should acquire the following Materials:

• soundproof tape Vibrostek-M;
• guides and ceiling profiles;
• ceiling hangers Vibrofleks K-15;
• screws LN;
• duplex connectors;
• Shumanet absorbing plate;
• vibroacoustic sealant shakers;
• gypsum plate thickness of 1 cm;
• sheets of drywall thickness of 1.2 cm.

Step by Step

After purchasing all the necessary materials, you can get to work.To carry out the final stages of two of the best: fixing plaster sheets alone is very difficult.A sound insulation of the ceiling is made in the apartment with his hands according to the following instructions:

Along the perimeter of the room about 10-15 cm below the ceiling and walls of glued joint in two layers of sound-insulating tape.

screwed on top of the tape guiding profiles, dockable dowel-nails.The distance between fasteners is about 1.5 m.

On the ceiling with the help of anchors fixed anti-vibration suspensions.The distance between the elements of the cross lines is 60 cm, the longitudinal arrangement - 80-90 cm Recent suspensions must be removed from the walls not more than 15 cm

makes installation of longitudinal profile lines:. By means of screws on the suspension fixed main.frame elements.For each connection "profile-hanger" is used 4 screws.

The main profiles are attached transverse elements at a distance of 40-50 cm. Connect the frame components using duplex connectors.Plugs of the guide profiles are drawn.

Under a ready frame set sound-absorbing plate.The joints of separate sheets must be tight to prevent the passage of sound through the gaps.

Held assembly of gypsum sheets.All pipes adjacent to the material should be wrapped soundproofing tape to create a reliable protection from extraneous noise.All seams and joints processed vibroacoustic sealant.

Running sound dampening mounting drywall sheets on top of a finished surface of the sheet gipsovolokna.Speakers of the tape around the perimeter cut off and the junction of the ceiling and walls are being worked vibroacoustic sealant.

After the sound insulation of the ceiling in the apartment under the drywall will be performed, care should be taken about the quality grouting between the sheets and the complete alignment of the surface.Further, the coating can be carried out any ceiling specialized formulations.

ceiling insulation in the apartment Video