Greenhouse Polycarbonate own hands

Greenhouse Polycarbonate is suitable for growing vegetables, to protect seedlings in the spring, creating a greenhouse.Collect the greenhouse can be on its own: you need to order a set or separately purchased aluminum profiles and polycarbonate.Construction design only takes half a day and does not require special skills of the performer.

Drawingsand schemes of polycarbonate greenhouses

Download scheme greenhouses polycarbonate

Getting Started

going greenhouse fairly simple polycarbonate own hands.But for the long life of the structure need to take care of a regular basis.The best light for greenhouses considered to strip foundations.

It will be enough to protect the greenhouse from distortions or damages.The width of the foundation should be somewhat greater than the width of the lower-profile bases.The base is made only required for the building perimeter.

Step by step instructions for the construction of greenhouses made of polycarbonate

Before the production of polycarbonate greenhouses and profile should be separately expanded design elements, several times to view the scheme.

This will help quickly and correctly combine all the elements.The construction of greenhouses made of polycarbonate with a collection of lower profiles - base.

Initially, the strip foundations are arranged support wall and corner joints.Then they fastened jumper (installed at the seams, twisted bolts).

Further work is being done on a manual:

1. On the rounded corners set the vertical supports.Screwed to the horizontal profiles.

2. Mounted rack-support 2-3 units on each wall.Loosely attached to the lower profiles: in their slots will be further set polycarbonate.

3. sets an upper support, which will strengthen the frame and serve as a basis for fixing the roof.In addition, they will serve as drainage.

4. The grooves on the vertical profiles mounted polycarbonate.Profiles tightly screwed to the base.

5. Installed extreme rafters for the roof.They have loosely screwed to the supports.Next, a ridged profile.Only after careful input and produce a lasting joint with the ridge rafters bolted to the upper horizontal profiles.

6. Mounted additional profiles, rafters: they are screwed to the already fixed the ridge.

7. Polycarbonate is further propped up by thin diagonal pillars: they are introduced into the free slots of the supporting profiles.With polycarbonate protective film is removed.

8. Separately, going to the window lifting roof, installed in the space between the profiles, as shown in the accompanying photo.

9. The roof is reinforced by mounting brackets between the rafters and the wall supporting profiles.

10. All joints between sheets of polycarbonate and grooved profiles are closed seals.A place where two sections are closed further with a thin profile.

11. Mounted gables (polycarbonate set in the grooves of profiles).They gather the two parts of the door mounted in an opening through the loop.

12. Mold base attached straps to strip foundations.

Detailed instructions will help you understand how to make the greenhouse polycarbonate with their hands correctly.But it is important to take into account the density of the connection elements.The joints should be smooth, and each connection - lasting.Additionally, it is recommended to study the video tutorials: they will help to get acquainted with the stages of the construction of polycarbonate greenhouses.

finalized assembly of polycarbonate greenhouses, as in the photo, install the adapter to the profile drains, attaching pipes to drain precipitation.

Additionally assembled fasteners to raise the window.They must be ordered separately: they are usually not included.

will help in the manufacture of polycarbonate greenhouses and creating high-quality ventilation.

Small blinds with aluminum frame optimally cope with this task.But before proceeding with the installation of this element should examine the design drawings and to select the optimal location of the window arrangement.

Video assembly of polycarbonate greenhouses with their hands