The ceiling of plasterboard in the bedroom

performing finish in the bedroom, you need a special responsibility to come to the finish of the ceiling, which depends almost all the aesthetic appearance of the room.So, in this article we propose to consider how to make the ceiling drywall in the bedroom with your hands, gradually completing the so-called "working operation", from which, in fact is the whole process.In this case the process is easy unlike plaster ceilings and does not require special costs and labor time.

But first, a little about the materials themselves, of which performed installation of the ceiling drywall in the bedroom.The first thing to remember - is that there are plasterboard ceiling and wall.Ceiling plates (aka "lightweight"), have a thickness of 9.5 mm, due to which their weight is less than that of the wall.

Another important thing you should pay attention - this is on the rails (marking UD) and Profile (SD).Sometimes several modifications of these core elements, but in order to fulfill the plasterboard in the bedroom with your hands, you need the UD-70 to SD-27, where the numbers 70 and 27 - it is the width of the guide and the profile accordingly.

Layout level and geometry

first where the work begins - a weaning ceiling level line around the perimeter of the top of the walls.You will need water, or even better - laser level, which are set benchmarks in pencil on the corners.Then taken otbivochnogo cord stretched from corner to corner on the benchmark and fighting off the line on each wall.Furthermore, along the ceiling at every 60cm also discourage line.

If the ceiling is expected to single-level, that is, one that has no bumps or holes in the form of various geometric shapes, then that's the layout and finishes.However, if the plasterboard in the bedroom is supposed to multi-level, then at the very ceiling plane is drawn estimated figure.Direct long lines discourage cord, short - ruler and pencil;radius is drawn using a rope tied to a pencil.

Installation guide

This process takes place with the use of an electric percussion instrument - punch, and it was his, not a drill (a drill YOU do not drill a lot of holes in the concrete slab).

first guide mounted on the perimeter by a broken lines, then along the lines of a broken ceiling mounted "U-shaped" holders every 40-50cm.Also, if there are several levels of rails mounted on the ceiling of the plane;All work is done with dowels of different lengths and diameters, often take dowels 6x40.

In general, the process is simple, but for a better perception of the offer watch a video where you can clearly see the whole process of installation in the nuances.

Installation of drywall sheets

Finally the finishing stage of installation.In general, the easiest, unless to do this work together.First with one hand presses the sheet and tighten the screws using a screwdriver, while the second man with both hands presses the greatest leaf area.

Here everything is clear, but that's more: sheets of drywall mount "in distillation", that is, so that the transverse seams sheets were mounted in a staggered manner.Sami joints while you can sharpen a corner 45 at once, or after installation.

Actually, everything, and to see what it looks like from the ceiling drywall in the bedroom, see the photos in our gallery below.

Photo plasterboard ceiling in the bedroom

ceiling installation Video drywall in the bedroom