Removing the toilet

Modern sanitary ware has a high level of quality, strength and durability.But, from time to time there are situations when the old sink, toilet or bathroom are unsuitable for use.In this case, they must be removed and exchanged for new ones.

Every month qualified dismantle and install hundreds of toilets.For them, this work is considered to be banal and simple.If you know some secrets, as well as some technological features, it is possible to dismantle the toilet on their own, spending a little time.

There are several reasons for which should be the dismantling of the bowl with his hands.It may be noted holding decoration bathroom or lavatory room, as well as damage to the plumbing.But, whatever the reason, the residents there is a need for specific action sequences.In order to understand how the dismantling (assembling) the toilet properly and quickly, you should see a special photo and video in the article.Typically, video showing a disassembly of the toilet, greatly helps working on this issue.

subtleties and nuances of

Typically, the dismantling of the old toilet is conducted immediately before installing the new one.Although, as in any rule, there are exceptions.For example, if a new toilet installed elsewhere.In this case, the dismantling of the old should be dealt with only after all installation work will be finished.

So, for you may need the following tools: crowbar, chisel, hammer.Armed with all the necessary, you can safely proceed to the solution of the problem.

should first free up space, located in the immediate vicinity of the working area.Remove everything you need, including the mats.Sewage must also be completely blocked.Some houses are kindly requested to notify the neighbors from the top, so that they for some time refrained from visiting the lavatory room.

After all the preparatory work will be carried out, it is necessary to block access to the water barrel.To this end, removed the special water supply hose.Due to the fact that to carry out the dismantling of the toilet cistern to be much harder than without it, the tank must be removed.So you need to drain the water, disconnect the hose and open the lid.Inside the tank there is attachment, which can be found without much effort.In the event that a tank on the wall, it can be removed without opening.There are models that have a relatively small tank.Owners of such toilets above step can be omitted if desired.

Next, you need to unlock the Base.In other words, if the base of the toilet is tile, it should knock.Similar actions should be taken in the case of the cement pad.There is another option when fixing the toilet bowl fastened to a wooden board.In this case, you need a toilet break, and only then proceed to dismantle it.

After dismantling of the old toilet with their own hands will be executed, sewer hole will need to close the cloth.This approach prevents the spread of bad smell throughout the apartment.During and after dismantling need to be monitored closely to ensure that the pieces do not fall into the sewer pipe.

If you adhere to the rules described above, the dismantling of the bowl will be executed with the minimum financial and time costs.

Video dismantling the toilet with his hands