Upholstery Equipment doors Colour Options

door trim Colour Options Run with your hands if you know the order of operations and technology, everyone can.

This method allows you to not only make the door more attractive, but also makes it possible to insulate it and reduce sound conduction.

Note that you can drag Colour Options as input iron and wooden doors.

And in fact, and in another case, the constriction is performed on the same principle, with some exceptions.

Colour Options Generally considered to be sufficiently durable material, and if all the work carried out correctly, upholstered door for a long time will become an attractive appearance.

With Colour Options on the door, you can create original drawings, as can be seen in the photo, placed in an article.

In addition, this method makes it possible to perform the optimum insulation and metal and wooden doors.

Having on hand all the necessary material and knowing the process technology, interior with their own hands Colour Options is fast enough.

For more information about how to upholster your own hands Colour Options iron or wooden door, described in the video, which is available below.

Video:

principles of work

Using Colour Options is one of the most appropriate and affordableways to perform thermal insulation of the door.

This constriction also makes it possible to reduce sound conduction and improve insulation.

Besides, living with their own hands Colour Options Door acquires an attractive appearance for years to come.

This material is a cotton fabric, which is specifically covered by a layer of nitrocellulose.

Today, in specialized stores you can find a huge selection of this versatile material, differ from each other like in some properties, and in colors.

Colour Options has a sufficiently high strength properties, though its low cost.

Since this material is quite simple to operate, while its operation it provides no shrinkage and is easy to clean from dirt.

door trim material can be carried out according to both sides, and the insulation is to be even more effective.

Padding doors this material helps to improve the overall appearance of the structure, even if it has any damage or defects.

It should be noted that this material has good resistance to moisture and frost, which allows its use in virtually any environment.

The disadvantages of this material include low fire safety, unfit to repair and weak to damage a mechanical resistance.

Meanwhile, its relatively low cost and ease of implementation work upholster door allow new material when necessary at any time.

Padding and insulation door with the help of Colour Options - it is now the most cost-effective way to help change the look of any door completely.

The photo posted below, you can see some options of different upholstery of doors.In addition, the video presented itself hauling door, which is carried out by hand.

Video:

Preparations

Despite the fact that the interior of the door leaf is a fairly simple process, it does have some peculiarities and nuances.

First we need to dismantle the door leaf from its hinges and lay it on a flat surface.

Further held a small repair, including, and change, if necessary fittings.

If there is an old door hauling, it must also be completely removed, do not forget to remove all items that could hinder new fix Colour Options.

also be a preliminary step to prepare all the tools and materials that will be required when performing work.

primarily require the material itself, the amount of which is determined by the dimensions of the web, thus it takes a small margin on the allowance.

Photo:

In the event that the web surface is made of wood, it should be reserved sheathing nails, designed specifically for the upholstery.

If the upholstery fabric is done not only to improve its appearance, it is necessary to think about that stuff, by which insulation is produced.

most often insulation door is carried out using foam, as well as any other similar material, which can be purchased in DIY stores.

You can also buy a special braid with which originally decorated the canvas.From the tool at hand should always be a stapler, hammer, and several types of screwdrivers.

also need pliers, scissors and, of course, building a knife with a sharp blade.

In the case to be hauling insulation and metal leaf, then you need to purchase the appropriate adhesive composition.

prepare all the necessary materials and tools, you can proceed directly to the upholstery fabric, as shown in the video below.

Video:

Proceedings

removal from the hinges wooden door to be smoothly put on the surface, for example, on two stools.

further across its surface should be evenly spread out prepared material, which will act as insulation.

Insulation in several separate locations grab by means of staples, while in edges of the canvas it is mandatory to leave a small area of ​​space.

Thereafter, the lining of the door leaf with their hands already prepared beforehand Colour Options.

material must be expanded across the surface of the door with the same margin on each side.The edges of the material are folded neatly so that kind of turned on a small cushion.

It should take into account the fact that the edges Colour Options will not have to deal with when you open the door to any surface.

further implement mount across the surface of the material to the web by means of special nails with round caps.Recommended step in this case is five centimeters.

best to start to fix the material directly from the top of the door, slowly sinking down and watching him stretch.

conducting mount Colour Options, you must carefully control the fact that he has not rolled and does not shrink, thus had all the same stretch.

At the final stage of the door is decorated with additional original elements, as the tapes that can act.

After that, the door can be hung on hinges and check for free opening and closing.

Originally Colour Options upholstered door you can see in the photo, which is placed above.

Sheathing metal door

when handling metal surface plating is carried out at a slightly different principle, with even easier and more quickly.

In this case, there is no need to drive nails and strengthen the material by means of staples.To start the web as laid down on a flat surface and prepare for the subsequent insulation and upholstery.

Also, all edges along the perimeter of smeared adhesive composition specially selected, and then evenly laid layer of insulation.

In so doing, you need to exercise maximum accuracy and ensure that the heater is not rolled, and it has subsequently had to be moved.

This insulating layer should be pressed with a certain force, and allow time for it to dry, then you can carefully trim the edges.

After the insulation is dry, you can safely get to work with Colour Options.It decomposes uniformly on the entire surface, trimmed, and then fixed on the adhesive.

Video:

In this case, first carefully glued the upper part, then the side with the hinges on the opposite side of it, and then only the lower part.

performing fixation piece Colour Options, should be closely monitored so as not formed folds and did not happen straight.

is followed to give the glue time to dry thoroughly, then the canvas can be put into place, checking on opening and closing.

more detail about the process described in the video, which is available below.Also, examples of doors, trimmed Colour Options, you can see in the photo is also posted below.