Repair gas stove with his hands

sooner or later need to make a repair gas stove catches almost all the owners of these devices.

address to the master is often expensive, and it would be desirable to eliminate the problem at home, so as not to waste time on transportation and repair tiles.

There are a number of problems of gas stoves, for example, to adjust the electrical ignition, with which you can actually handle themselves.

This will help you and analysis of the most common failures in the plates and solutions, as well as video, which covers all stages of work.

plate device

Before you do repairs, you need to understand what a gas stove, which details are present in it, and what a gas stove repair their own hands may be required in a particular case.

firms producing gas stoves, a lot: Gorenje, Ardo, Ariston, etc.But all the tiles, even if different in price, have a similar type of indoor unit.

most visible part of any plates - burners.Each burner is fixed to the table plate with bolts.Burner also consists of several parts: they have a cap and injector divider.

Each burner is brought tube of steel and copper, having a mount, like an American.Due to this burner apparatus and receives gas.

to work with burners no special tools are required: You will need a key, probably, at 13, to make out the details of the burners if it needs repair or cleaning.

After completion of the repair and to assemble the assembly design and check whether it is sealed to prevent gas leakage.

Each cooking zone is on the perimeter of the candle in the amount of two pieces.

One helps create ignition when working with piezo or electronic circuit, and the second thermocouple is connected to a circuit that controls the combustion.

Candles differ from each other even outwardly, so mix them up would be difficult.

Candle for electrical ignition has ceramic caftan, it is necessary to prevent the penetration of sparks below the required level.

can see how it ends up on the plate body in the flow of the arc.

That is why it is important to qualitatively grounded plates, where the integrated electrical ignition.Also, do not tolerate the use of electrical ignition podvodok for water and metallic threads.

is important to separate the plate from the riser by means of special gaskets during installation and repair, otherwise there is a real risk of explosion.

Candle thermocouple has a coat of bronze, which is a powerful conductor of heat.

On how quickly cooled semiconductors after the flame goes out, depends on the reliability and speed of protection switching, the gas shut-off after you have finished using the stove.

Under the table you can see the plate collector.It looks like a thick tube, which differ from the liner to the burners.

gas flow control is due to the solenoid valves, the number of which equals the number of burners on the stove.

It is necessary that if the flame goes out one burner, the other is still able to function.

solenoid valves are equipped with an inductor.When heated, the thermocouple EMF is formed, which fixes the device open.

Gas stove Gorenje, Ardo and other models can have three different types: there is an electric oven, gas grill, or a combination, depending on your device model.

most evenly heated oven, if relates to an electric type equipped with electrical grill.

Before purchasing the oven, consult with a specialist to find out how much power the device can withstand.

Video:

From this, ultimately, depends on the choice of models and brands: you buy tiles Gorenje, Ardo, Kaiser or some other model.It

oven consumes a large part of the amount of electricity during the tile, so when it is selected should be especially careful.

Works oven in different ways, depending on the type of device: it can be equipped with a fan, to have two heating mode or have a multi-functional design, equipped with forced air circulation type.

Repair plates

Complete repair gas stove Hephaestus, Gorenje and other models require the intervention of professionals, asown it will make not only difficult, but also dangerous.

However, there are a number of works that it is possible to carry out with their own hands at home, and bring the plate to a working state, if the damage is not too serious.

The most common problem is gas stoves electric ignition failure.The elimination of this problem will help video - watch it before beginning repairs to make things right.

First of all, you need to turn off the stove from the power supply, remove her septum and inspect for deformation.

If you see that on it there are chips and cracks, it means, that's why cooker did not work, and the partition must be replaced.

can change it only when the ignition is turned off or avtopodzhig - do not forget about it.After replacing, check how well it works now.

If your stove or other Gorenje models built pezorozzhigom, the technology will work slightly different.

Video:

First you need to remove the device from the control, and then remove the partition plate, located below and remove the ignition, which is bolted to the bracket using the fasteners.

If it is cracked or otherwise deformed, it should be replaced.To put a new igniter, you need to disable the module responsible for the ignition.

Find it help guide you to the plate.

Thereafter, in place of the old parts to install the new igniter and check how well is now working stove.

often in devices after prolonged use or bad start seizing close the oven door.

To make such a repair gas stoves Indesit, Gorenje and others, need to roll out the screws that hold the door and shake them in different directions, so that the door locks firmly on the hinges from which, perhaps flew.

After this re-tighten the bolts, if done properly, the door must stand in place and the oven should be tightly closed.

Video:

If the item still does not work, then maybe you should replace the gasket, which is responsible for a snug fit to the oven door frame plate.

To do this, you need to unscrew the hinges, which are located above the handle, and remove the cover plate.

likely internal screws and panel edges will also need to remove, or you can simply move them and thus remove the cover.

screws, with which fixed glass panel unit must be removed, and then remove the glass itself and disconnecting pads that hold it.

Now you need to disconnect yourself pads that are located between the door and the glass from the inside.

Now you need to change to a new gasket and return all the details in place, in reverse order.

Use the instructions from the manufacturer, becausedifferent device models will be slightly different and will act differently.

often out of order ELECTRONIC avtopodzhig or tiles, and the flame is interrupted or completely disappears.If the device is working properly, the flame must be flat and have a bright blue color.

If your device is running the other way, it means that ignition or avtopodzhig need to properly configure and adjust the plate.

Video:

To do this, you must first turn off the gas, and then delete the partition.Then you need to re-enable it and determine which choke adjustment is required.

to adjust the work, it is necessary to promote a set screw that locks the plate - he is responsible for a proportion in which the gas is mixed with air.

setting it to the desired position, turn on the stove and check how it works.