How to build a pool in the country with their own hands

One way to get a dacha pool of almost any size is its construction on a special project. is worth the pleasure is not cheap, and not everyone can afford such a luxury.An alternative construction is custom designed pool in the country with their own hands.How it's done?What are the difficulties you have to face?For all your questions and we will try to answer in this article.

Acrylic pools to give a photo

There are two ways to build your own cottage pool - You can use ready-made bowl, made in the factory, or create it from scratch by monolithic concrete casting.If you want to get a unique end result, the second method has to this as well as possible.If you are satisfied with the standard factory solutions and simple installation technology, the best time to take advantage of ready-made containers.

How to build a pool, using the original packaging

pool in the country with their own hands photo

pool villas with their own hands created this technology, provides a huge amount of earth works - will have to dig a pit, in shape and size matching the factorybowl.But the difficulty of making the pool on this technology is not an end - to accommodate the desired range of communication have to build an underground room, allows you to freely serve the water supply system, drainage and filtration.Due to the fact that most of the equipment necessary for the operation of these systems, powered by electricity, utility room should be dry - this factor already suggests concrete with waterproofing elements.

Based on these subtleties install the original packaging, this device pool manages the process is expensive - a huge amount of material required and the complexity of work reduce "out" the apparent simplicity of this technology.In addition, the installation of plastic pools with ready capacity allows you to create only standard forms.

should also understand the difference and used containers - usually used for the manufacture of a plastic or acrylic.Plastic cup for the pool is rather fragile product - despite the apparent strength at low temperatures, it breaks at the slightest impact.In contrast, acrylic pools are much more durable and able to withstand low temperatures.If you decided to build a swimming pool with their hands on this technology, it is better to give preference to acrylic bowls.

How to build a swimming pool with their hands

Construction of concrete swimming pools in the area with their hands

By its construction cost and labor pool in the country by a monolithic casting of concrete is virtually no different from the previous method.The difference is that in this case all the work can overpower independently.What we now do.

Construction of concrete pools

To begin with, as in the previous method of construction of the pool, you have to dig a trench - its shape and size is necessary to think in advance.Be sure to take into account the space occupied by the concrete, and it is in this case from all sides.Free up a lot of unnecessary soil, so the question of its disposal must be solved in advance.

When digging the pit is finished, proceed to fill the bottom of it.To the concrete pool deck has served long and not subjected to cracking as a result of movement of soil, concrete casting is absolutely necessary to strengthen the framework of the reinforcement.

Need surround frame fittings connected by a binding wire - welding is not allowed.The welded frame is hard enough, and at the slightest shifting of a reinforced soil cracks.

immediately necessary to provide reinforcement issues in the areas of the side walls of the bowl of the future - in principle, the reinforcing frame can be assembled all at once in its entirety.It will even be better - the result will be not only in-situ concrete, but also reinforcing its frame.

The next step is the construction of the pool work with your own hands provides concreting of the lower bowl plane.There is nothing complicated there - poured concrete is compacted using special vibrators and is aligned with the pre-installed beacons.It is important to understand that the poured concrete cushion depending on the volume of the pool should not be less than 200-400mm.

A few days later, when the concrete foundation podstynet, you can proceed to the construction of the vertical formwork and filling it with concrete.Due to the large amount of poured concrete, formwork is better to use metal panels - just less durable material will be crushed, and all your work will be in vain.

should also pay special attention to the preparation of concrete - because of the large amount of work necessary to get a concrete mixer (not necessarily to buy, you can rent or ask at the time of building a swimming pool at a friend).

solution is prepared in a ratio of 1 to 4 - one part cement is used as a filler and two parts sand and two gravel.

ideal option would be to order a ready-made concrete formwork and pour all in one fell swoop - so you get exactly the quality monolithic structure of reinforced concrete.

In the next phase of work involves the construction of a concrete pool complete drying concrete bowl - the concrete should properly settle and gain strength.After a few days removed formwork - outdoor concrete dries faster.But too rapid drying of concrete, too bad - he did not have time to collect the necessary strength.Therefore, the next week you will have to devote abundant moisture svezheotlitoy bowl.The more moisture will involve a concrete, and the slower it will dry out, the stronger will.Complete drying of concrete and set their fortress occurs within 2-3 weeks.Only after this time you are ready to proceed.

Waterproofing concrete pool

next step towards this goal is the waterproofing of the bowl.Wondering how to build a swimming pool with their hands, should understand the importance of this event.Penetrating into the concrete moisture with the onset of cold weather freeze.But when it freezes, it expands, forming microcracks in a way that would later turn into a global violation of the integrity of the pool.

pool waterproofing is performed by means of special formulations.Usually, they are sold in a dry form - they are somewhat similar to the tile adhesive.Apply this diluted in water composition of ordinary trowel in several layers.Moreover, each layer must be applied in different ways - it is a prerequisite of using such a sealing.

When the insulating layer is dry, you can start decorating the pool.Usually used for this purpose, or mosaic tiles.Voids under the lining is not allowed.

Pools to give their own hands

And the next moment, concerning the question how to make the pool with their hands - it should be understood that without water drainage and treatment system is still not enough.This problem is solved by the use of mobile portable units, equipped with a powerful pump - this approach is much less expensive than installing a complete system for the pool.

And so it is a swimming pool in the country with their own hands - all at the same time simple and complex.And, despite the fact that the construction of the pool is the cheapest option, yet this process will require you to the enormous effort.In any case, you can always turn to the firms specializing in the construction of swimming pools or installing prefabricated bowls.

author Vladimir Belov