Installation spotlights

described in this article, what are spotlights, where they are used and how to install.

One of the new-fangled methods of lighting the living space is the use of spotlights.No chandeliers hanging overhead, wall lights and, especially, floor lamps - it's all in the past.While there, do not underestimate the hurt and chandeliers, their potential is quite high, despite the impressive dimensions and mounting method.But, anyway, point lights slowly and survive them.Small size, occupying almost no space, sometimes even the most bizarre, the lights do their job better than their predecessors.

Spotlights interior

relatively simple device, and the ability to use in the construction of modern and affordable materials makes them available for virtually all segments of the population.Along with lamps, designed to work with ordinary light bulbs, used and new models that use energy-saving lamps, LED fixtures and even the latest gas-discharge sources of daylight.

Installing spotlights with their hands

Each model spotlights designed for use with a particular lamp power and voltage.Some fixtures are made to operate on 12v voltage, others are powered by a common network to 220v.It should be remembered that if the work of the fixture must be some certain conditions, they are strictly necessary to carry out.You can not set a ceiling luminaire for the twelve volt mains supply and connect it to the city network in 220v, it is fraught with fire or short circuit, at best.For lamps operating on 12v, use step-down transformer.As with other lighting to spotlights, you can use energy saving light bulbs.

bulbs for spotlights

Besides differences in the operating voltage, spotlights may vary in shape seat.To install one round hole required for other square or triangular.These mounting holes can be of different diameters, the larger the lamp, the greater the need to cut a hole for installation.

In fact, the installation of their own hands spotlights - it artless, almost no subtleties.

In the first step, you create the desired mounting hole size for round fixtures used circular saw or as it is called, the crown.For materials of different hardness there is a separate type of crowns.For concrete - carbide tipped, for a tile - a diamond-coated, well, for soft materials such as wood or drywall used in ordinary steel crown.For holes of configurations other than the range used file for drywall or concrete Bulgarian.

Mounting own hands spotlights

When an opening is prepared, the lamp should be connected to the mains.There should be no difficulty, important not to confuse where the phase, zero and grounding.Even if you mess up, then worry about it is nothing, it just will not work.You have to carefully deal with the connection and execute it correctly.

Installation spotlights

remains the case for small, install it in the mounting hole in the ceiling.Locked Down Light to cut a hole using special clamps.To install it, insert the clamps is expanded and light in the cut hole.Spring-loaded terminals themselves are set into place and fix the lighting fixture in the hole.Before you complete the installation of his work, it is desirable to check, not to take out light from the hole several times.Then screw in a light bulb and apply voltage to it.

Installing spotlights

Spotlights fit equally well to illuminate furniture and ceilings made of plasterboard or suspended ceilings.They are able to transform the room where installed, more beautiful and original.