How to glue wallpaper meter

Almost all of us have to glue wallpaper on their own or to help with this person, so the work of the technology does not cause problems - Apply glue so attached to the wall.But on the market today can be found unusually wide wallpaper pasting which enters into a stupor, even some experienced workers.wallpaper, to be sure, very beautiful, strong and unusual, and in this article we will talk about how to glue meter wallpapers.

material characteristics

The meter wallpaper every day are becoming increasingly popular - people want something new and "fresh", and the unusual and beautiful wallpapers are such.The width of the material exceeds the usual 53 cm almost in 2 times.They come in 90, 110 and even 140 cm wide, and if you know how to properly glued wallpaper meter, one can only imagine how much will quickly pass such repairs!

Of course, for all the attractive new items have to give a round sum, that wide wallpaper often frighten ordinary citizens with their price tags.But those who have already had to deal with this material, in one voice say, that every penny spent is worth it - Wallpaper look homogeneous, harmonious, are long and undemanding to use.

It is time to consider the merits meter wallpaper:

1. Gluing meter wallpaper is much faster and easier (owning the technology) than standard.
2. Figure is a more solid.
3. Less joints and seams.
4. Wide wallpaper produced abroad only under special technology and high quality.
5. Despite the apparent high cost of meter wallpaper, one roll will be cheaper than the usual two rolls of wallpaper of the same quality.
6. Ideal for large rooms.

As usual, even the most high-quality products have their drawbacks, and meter wallpaper are no exception:

1. glue them alone is problematic, especially if you do it the first time.
2. Before pasting must be very carefully prepared wall - wide wallpaper look good only on the perfectly smooth and flat surfaces.Otherwise joining adjacent strips of wallpaper will be distorted.
3. Despite the impressive width, the length of the wallpaper may not be enough, which is why have to buy a roll, so it is necessary to make accurate measurements of the room area, before to go to the store, especially in rooms with non-standard quadrature.

Preparations

Before you start wallpapering and transformation of your home, you need to go through several mandatory steps - prepare the walls and make calculations.Without this preparation, any idea is doomed to failure, so please read the sections below.

How to calculate the consumption of wallpaper

correct calculation of the amount of wallpapers for repair can save you a considerable sum, and get the job done well and quickly.Many for this purpose decide to use a special program - an online calculator for wallpaper.But even the best calculator will not help you with wide wallpaper, especially if you are lucky enough to own an apartment with non-standard layout.

Settlements consists of several stages:

1. should start from the perimeter, calculating his elementary scheme, familiar with geometry lessons: (length + the length of the wall adjacent to the wall) x2.For example, if there is a wall of a length of 4 m and a wall 3 m in length, the calculation would look like this:. (4 + 3) x2 = 14 m
2. Measure each wall separately along the bottom edge, making amendments to the doorway niche, deepening and extendingpart.
3. Many "subtract" the doors and windows, reasonably believing that they will not be spent wallpaper.But if you are not strong in the calculations and you can not calculate how much in total hold window and door openings, better let it stay a little bit of material than in the case of errors have to buy another roll.
4. Needless to wallpaper glue for furniture?Ideally - yes.Generally, before pasting it is desirable to move all the furniture out of the room.But if it is a cumbersome case-compartment in the wall, you're not going to rearrange the next few years, we can not burden themselves with unnecessary worries and costs.
5. is always recommended to keep a roll or half roll in reserve.It is necessary in the event of unplanned repairs, replacement of a piece of wallpaper (child painted marker, dog scratched, etc.).If you do not leave anything in the reserve, then find exactly the same wallpaper on the market and then can be quite problematic.

Preparation

surface in a wide wallpapered the most difficult and time-consuming task is not taping, and preparation of the walls.To start, it should be at a time when there is a ceiling finish, if you are dealing with a new building or doing in the apartment repairs.

What is the preparation of the walls:

1. Remove all sockets and switches cover, and carefully cover the hole with tape or masking tape, so it can be easily removed after use.
2. Remove from the walls of all the fasteners (nails, screws, screws).
3. Remove old coating (wallpaper, paint, etc.).Delete should be completely down to the smallest pieces.
4. If necessary, align the wall, patched potholes and bumps skived.The dried putty should overwrite with fine sandpaper.
5. is mandatory even for perfectly smooth and straight walls should apply one or two coats standing.It increases the adhesive force (adhesion) of wallpaper to the wall and saves adhesive.The primer seals the every little hole in the wall, not allowing the glue to soak into it and ensuring strong adhesion of wallpaper web.Apply glue necessary to completely dry primer.Drying time can be different, depending on the number of coats applied.More details can be found on the packaging of the primer composition.

If you went to the apartment with a catastrophic curved walls, the alignment of which take a lot of effort, money and time, it makes sense to consider the option of lining the surface of the plasterboard.In this case, you can "kill two birds with one stone" - create a perfectly flat surface, and make high-quality insulation, which is especially important for modern apartments with thin walls.

Videos like wallpaper glue and correctly align the walls will help you to work quickly and competently:

How to hang wallpaper: User

When all the preparatory work behind, it should be checked and, if necessary, fill up your arsenal building.

for gluing wide wallpaper, you will need the following tools:

• wide brush or a flat brush construction with stiff bristles for applying adhesive (some prefer to use rollers, but better to start with a brush);
• rubber roller for proglazhivaniya wallpaper;
• line with a minimum length of 50 cm;
• simple pencil;
• plummet;
• stationery knife;
• scissors;
• clean dry cloth.

Gluing wallpaper wide best two or three, because the habit is difficult to cope with large cutting material.

Technology gluing wallpaper meter as follows:

1. Measure the length of the wall with a tape measure and calculate how many strips of wallpaper you will need to cover it.
2. Make marking the first web.One should start from the window, moving deeper into the room.At 105 cm from the angle of a vertical line from the ceiling to the floor, using a plumb line and a ruler.In any case, it is recommended to leave a few centimeters, if the walls are not quite straight.
3. When working in corners should leave allowances, which subsequently overlap cloth on an adjacent wall.In this will not form an unsightly gap.
4. Cut required for a number of wall bands, making a small allowance in length of 2-3 cm.
5. Generously grease the wall with glue on the entire width of the cloth, slightly beyond the marked boundaries.
6. Since the first time to glue wallpaper wide better assistant, one of you is to keep the top edge of the cloth, to rise with him on the ladder to the ceiling and to make clear to the edge of the boundary line of the ceiling and walls.The coincidence of the vertical border, scheduled pencil, should control assistant.
7. Smooth wallpaper to the wall with a dry cloth or rag in the gloved hand, moving from the top down and expelling air bubbles to the edges.In no case do not try to stretch the wallpaper on the horizontal, or after drying, you will find not the result of which had been counted.
8. Place the following web close to the already glued by applying them without overlap or gaps.

In most cases, a wall is impossible to accommodate the same number of bands, and you have to cut the cloth vertically.Then the wallpaper on the adjacent wall should be attached to the corner, blocking the cut, it has not turned the slit, and speaking out of the adhesive material with a dry cloth.

Surplus wallpaper (allowances for length) should be trimmed only after the complete drying of the cloth, because otherwise the list will likely cringe at the corners and curves are formed near the floor gaps, disguise that can not be even a broad plinth.

As wallpaper glue one

If it so happened that for gluing wide wallpaper you are unable to get an assistant, this job can be handled independently.Some people believe that custom wallpaper can be glued only with one or two assistants, but it is not.Roll width is more than 100 cm, and the scope of human hands - 150 cm, so you can easily cope alone, dock joints and align the panel.

sticking principle is exactly the same as in the case of work with an assistant.If at first you could not stick the canvas exactly, it can be removed and re-attached to the wall - dense material, usually lets you do this without compromising the structure.

Pasting remote places

Places for batteries, in the corners and areas over doorways always cause difficulty, especially if we are talking about broad wallpaper.To glue the panel for the battery, you have to cut the cloth into smaller parts.It is best to cut one sheet to make it easier to recreate the original image.

Make it so that image completely coincide, in such places is quite problematic.And if above the doorway inexperienced person can still cope, then do it for the battery can be only under the condition that you have the appropriate experience or design skills.

First you have to glue the cut wallpaper free section of the wall, and then align it at a pre-designated vertical.The second segment is glued to the opposite end of the battery aligned as clearly as possible, and seam closing edge.Performing this operation perfectly on the first try is unlikely to succeed, so please be patient.

Fleece Mural will be the best choice for inexperienced builders - their position on the wall can be easily adjusted as much as 10 minutes after the stickers.But to make this possible, it is necessary to use adhesives without additives for the rapid solidification.

Useful tips for beginners

Below are some helpful tips for beginners to professional builders, which will help to learn how to glue non-woven wallpaper meter correctly and safely:

1. Before mounting as carefully as possible, prepare the wall.Go too far in this respect, it is impossible - the ideal would be to the surface, the greater the likelihood that the wallpaper prikleyutsya more smoothly and beautifully.
2. To improve the stability of the adhesive composition, it is recommended primed surface.
3. is extremely important to create suitable conditions of temperature in the room to ensure even drying glue.Otherwise, wallpaper sheets may be deformed, and the figure will move at the joints.
4. During gluing and to dry or allow drafts.
5. Humidity in the room should be minimal, otherwise the glue will dry for a long time, and the quality of work left much to be desired.In the worst case, high humidity can cause the appearance of mold and mildew under the wallpaper.
6. Gluing vinyl wallpaper meter recommended in the summer (before heating season).
7. Note that the wallpaper behind radiators will be exposed to high temperatures for a long time, so they can cringe and move away from the wall.
8. In order to understand the process of gluing wallpaper wide, enough to make a layout for the first segment.But if you are not sure, it is better to be safe and to partition the room, just counting and cutting the roll at the desired number of blades.
9. inexperienced builders, who want to manage their own, better acquaintance with the world of wide formats with non-woven wallpaper, because they do not have to glue promazyvat (walls only), and treating them is easier than with other species.
10. If you bought a non-woven wallpaper, buy adhesive designed specifically for them and recommended by the manufacturer.
11. very convenient to use two ladders to ensure uniform leveling fabric on both sides.
12. Many inexperienced builders did not know how much time must elapse after gluing before you can open the windows and ventilate the room.It is necessary to take into account the rate of drying of the adhesive composition and the kind of wallpaper, as some days will be enough, while others will be dry for 3-4 days.Information about this can be read on the packaging adhesive.
13. And the most important rule - do not allow drafts while working, otherwise, you can be sure that you will have to redo everything again.

The meter wallpaper gradually cease to be a novelty value, and they can be found in almost every apartment.Another question is whether you are going to make repairs or prefer to pay a construction company?We hope that after reading this article, you will not have problems with self-sticking wallpaper widely.