How to properly and carefully glue the ceiling moldings

decorative moldings (also known as the fillet) perfectly hides all the bumps on the junction of the ceiling and walls.No one room is not ideal polyhedron - is unattainable in the construction of buildings.Consequently, the wallpaper on top will fall unevenly.Such a defect have to disguise, and best of all - with the help of fillets.Today I will share experiences, and tell you how to stick to the ceiling moldings.

sale is a lot of different options, but you need to pay attention only to the fact that the entire plinth (all bands) were from the same batch.Adhesive for gluing it in the shops of building materials is also always available.So it seems to be no difficulty.Read the instructions on the rules of adhesive application and start working.

However, the main difficulty in bonding skirting - in the correct fitting of his pieces to each other.When we glue along the wall, the special difficulties will not arise.But how to be on the corners as pieces of skirting dock at these places?That is why the need to take in the store at least one strip more for training, and stock building or office knife for cutting paper.They are very comfortable and smooth cut fillet.You can even cut hacksaw, but the knife is much more convenient.Cutting should be exactly straight, then to the joints were invisible.

nuances when gluing skirting

Gluing skirting better in the following sequence: first stick the strips in the corners of the segments, and only then glued on the perimeter.If the corners of the strips are glued together smoothly, on straight walls will not be any trouble.The stores sell ready-made corners of the ceiling moldings, but if you can not buy them, will have to cut yourself.Everything depends on the correctness of the chosen cut-off angle.You must be trained on the individual pieces in the choice of angle (for this and buy extra bandwidth).It should not be confused just where is the right band, and where the left.Better pencil mark.If not properly obtained crop bevels on the eye, it is necessary to use a device called a miter box, which you can either buy or make yourself.

segments plinth is glued to the ceiling and wall in turn.It is necessary to pay attention to the correctness of the choice of the place of gluing the first piece in the corner, because it is attached adjacent to it.Like glue, and the angle will look.Clay smeared a thin strip on the other side of the plinth, which will be adjacent to the wall and ceiling.If ceiling stretch, glue is - only the lower portion on the back strip which is pressed against the wall.After applying the glue on the fillet should wait a bit, and then firmly press the strip to the bonding site.Clay quickly grabbed.

Masking the joints and gaps

If at the junction of bands still see the gap, his well masks white sealant.excess glue must be removed immediately with a dry cloth.And again, before starting work on the adhesion of skirting boards should pay attention to clean hands.On the baseboard, after his hands pressed during adhesion, can stay dirty.

If you have not painted or whitewashed ceiling, then the best option would be finishing next.Easy walk through the putty all glued Plinth, promazyvaya them as paint, and after drying, remove the excess fine sandpaper or a sanding sponge for special work on the plaster.After this final finishing skirting and ceiling become a single entity, and not a single gap you can not find - the work will look perfect.Here's a little secret from personal experience.Other secrets you can learn by watching video: