How to stop the washing machine during the wash cycle and turn it off

There are situations, when an urgent need to cancel the running wash.It can happen for various reasons.For example, you suddenly needed to leave the house, and you do not want to leave permanently wet items in the drum.Or you discover that you forgot in your pocket washable things any subject, be it phone, a purse or car keys.The latter case is particularly dangerous, since a foreign object can damage the complex mechanism of the washing machine.

If there was such an emergency situation, you need to safely remove the device.For information on how to do this without undesirable consequences in the form of water leakage or damage to the machine, we'll show in today's article.

• If your washing machine is equipped with the button "Pause» / ​​Pause, it can be used to suspend the washing process.Normally you need to press the button for a few seconds until the machine stops working.This method is suitable if you need to interrupt the process, eg in order to pull out of the drum extra stuff.
• stiralok On some models capable of being stopped washing, when you cancel all preset modes.Returning all the buttons and toggle switches to its original position, you will be able to suspend the machine.However, if there is water in the hatch before you open the door, you should run the program Spin or drain.

to result in a power surge electronic module is out of order, it is recommended immediately disconnect the washing machine from the network and when the electricity will again insert the plug into the socket.

Most modern washing machines with power off "remember" the stopping of washing, and after the resumption of supply of electricity continue to operate from the same location.On older models, an unexpected power failure program gets off, so then wash starts first.