Replacing kitchen fronts

to update the look of the kitchen, it is not always necessary to buy a new kitchen furniture.Often, the body of the old headset has almost worn out.In such cases, it is wise to only update the facade, which is much cheaper than buying new furniture.Next, tell us more about how this can be done.

Materialsfor kitchen fronts

facades for kitchen countertops and change for a variety of reasons.However, most people are hesitant to this because just want to change something in your home interior.A replacement of the facades on the kitchen headset - one of the least expensive ways to do this.It is advisable to entrust this work to professionals.They will froze headset will make individual elements disposed costs.From the landlord will only need to choose the appropriate material and, in his opinion, the color scheme.Although there are experts to give some useful tips.Update facade allows you to change the overall color palette of the kitchen, and even bring into it new forms.Moreover, it can be replaced as a whole or only the necessary items.In particular, we can give a new look familiar drawers.

Before you decide to update the facade, it is desirable to deal in building materials, with which formed the external view of the kitchen.In addition, they are more dependent on how long facade will be able to serve.So, what materials and components used to update kitchen sets?

facade of particleboard

This is one of the cheapest materials.It is based on wood chips and resin.Despite the fact that the particle board is a fairly capricious, when used properly, the facade of it may well last for up to 8-9 years.The most important thing when buying this material - select a quality product.Poor quality chipboard could soon after the installation of swell, warp.In addition, we must not forget that in its manufacture are used resins which are under the active influence of the sun's rays can start to evaporate and those vapors are harmful to the lungs.

Kitchen with facades made of laminated chipboard, it is desirable to use in extreme cases.For example, this material is suitable for a country house.Because of its advantages should be noted only the low price and the ability to manufacture custom facades, while not increasing their prices.Deficiencies with him a few more.For example, from this material facades look quite rustic.In addition, they have poor moisture resistance.They were difficult to care for, and they often have a small lifetime.Laminated chipboard is loose material.For this reason, the facade mounting gradually loosened.More should be noted that this material can not be done kitchen sets a curved shape.

Facade of MDF- sheets

It is a fiberboard with average density, which is made from softwood fibers, by pressing.In its production does not use hazardous chemicals, therefore it is safe.This material when used properly, can last up to 6.5 years.

These facades have a relatively low weight, they are more reliable hold fasteners.In addition, they do not deform under high temperature, direct sunlight or moisture.Today MDF is often used as a raw material for the production of various pieces of furniture.This material in its performance characteristics is not inferior to the kitchen facades made of wood.

for headsets often use laminated, painted, veneered MDF and coated MDF, called "postforming".Relatively inexpensive considered laminated MDF.This material has a major drawback, namely that it does not tolerate high temperatures.Furthermore, the film can not restore damaged.The most expensive of them are considered to be painted plates.This is due to the complexity of their painting.However, they are pretty solid.As for post forming, it is a plastic that is almost completely covers the MDF-plate and captures still ends.Perhaps this cover because of its resistance to corrosive conditions can be described as the most practical option.

Aluminum profile for facade

This material does not deform over time, it is able to keep a good loop.Aluminum can be used in combination with other elements, as well as to create windows.

facades, which are based on aluminum profiles are aluminum frame, which encloses the filling.This can be MDF, plastic, rattan, or glass.

The advantages of aluminum profiles include long service life and the possibility of combining in one frame of a few materials.In addition, this profile allows producing facades with non-standard dimensions, without increasing their prices.In addition, aluminum profiles are not afraid of moisture, mechanical damage and high temperatures.Yet they allow the creation of glass facades on which images are plotted.

As for the disadvantages, it is, above all, the high price and the need to purchase special fasteners.In addition, aluminum is a material which fades with time.Also, we must not forget that it is a fairly soft, and therefore, a crack may easily appear on it.Therefore, when cleaning can not use powders with abrasive particles and other aggressive cleaning agents.

Glass facade

This material is for use in the kitchen facades are often decorated with different patterns, paint, darken, corrugate.Glass can even unattractive elements to make beautiful.The advantage of it is also the fact that it is not afraid of getting fat, steam and various chemicals.Although, it is dangerous because it can easily break.To protect themselves and their children from it, it can be used in organic glass facade.

Plastic facade

Such facades made simply by sticking plastic plates on the basics of particle board or MDF.The ends are handled in three ways.The first way - postforming.When the two ends of it are folded onto plastic base ends, and the remaining treated PVC film.The second method - the ends of the facade treatment using acrylic or PVC edge.The color of the edge of the material does not have to match the shade of the facade.The third method involves edging aluminum profile.

accessories Selection

Each suite has its own kitchen accessories.And its quality largely determines how many will be able to serve the furniture.For this reason, you should not try to save money on hardware.

To update the facade may require the following types of hardware: hinges, locks, handles.More need towel drying rack and sideboard, corners, lining for lining.In general, if you plan to upgrade the furniture in the kitchen, then choose the best accessories in the same style.

makes updating kitchen facades own

Before you update your kitchen fronts, make sure that you have everything you need for this.So, you need a set of tools and parts for the facade elements, furniture, hardware, glue and instructions for producing jobs.

The hardware is recommended to buy only the best.The Miser is not necessary.In particular, the need handles, hinges, locks, and drying rack for plates, a hanger for towels.We also need to be trim and accessories for cladding.

Kitchen facades it is possible to order, for example, in the carpentry workshop.Only this will require advance to make the necessary measurements.Material is desirable to buy.Often, so it is cheaper than to buy it from the masters, performing renovation of the kitchen sets.

Now a closer look at the process of replacing the kitchen furniture facade:

1. You must first remove the old doors and measure them.Screws when removing the need to twist gently.The same goes for removing nuts and bolts.
2. then need to dismantle the front wall, simple and drawers.The walls are often mounted on the glue.Therefore, we must act carefully so as not to deform the grooves and spikes.
3. Next, you need to get new facades and walls, as well as to pick up the necessary accessories.As already mentioned, these elements can be made to order.It should focus on the previously completed measurements of the size of kitchen fronts.
4. Next install new parts handles, hinges, corners, and other necessary elements.For this purpose, usually just enough to twist the screws or screws can be used.Sometimes the need to make holes for the bolts.
5. now on the front wall boxes installed handles.Then you need to put on the door hinges.
6. After that you need to install the front wall of the boxes into place, using glue if necessary.Finally, mounted hanger and other additional accessories.

Update facade cuisine rattan

For Materials needed: scissors, stapler furniture, necessarily need to be decorative strips of wood, rattan fabric, acrylic paint, sandpaper, small furniture nails, hammer and brush.

of work stages:

1. First, you need to measure the front of the doors.It is necessary to calculate how many meters of fabric rattan need to perform finishing facade.Incidentally, it is cheaper to buy in the finished material is a roll, and on the interval, i.e.you buy it is so much m leaf, as need be.
2. Then roll rattan fabric should be put in the bathroom, then moisten well with cool water.In the bath material reserve approximately 35 minutes.During this time he should be well soaked with water.When rattan gets wet, it will increase in size.That it must be installed in such a way.When the material dries, it will take the desired shape.
3. While rattan is in the bathroom and wet, it is necessary to prepare a wooden stick, which the material will be pressed on the perimeter of the facade.It is important to frame colors in harmony with kitchen interior trim and new headset.
4. If need be, the straps color can be changed by covering them with acrylic paint the desired shade.Nail gently applied to strips, after which they must be dried.To remove the rough edges, you can use fine-grained sandpaper, which painted carefully polished billet.
5. Then you need to apply another coat of varnish, dried and then sanded cloth.As a result, to obtain a perfectly smooth surface, you will need to apply several layers of lacquer.
6. When rattan fabric gets wet enough, it is necessary to get out of the bath, and then roll it out on a flat surface and cut out according to the standards previously removed.The doors can be closed as a whole or only the middle.
7. Then take a sharp pair of scissors and cut the fabric to size rattan.Then fasten it to the bottom of the door using the furniture stapler.Staples possible have close to the edge so that they could hide under the clamp.
8. To get a neat rattan frame attachment, you must strap, from which it will be done, add on an angle 45⁰.It is better to use a miter box.Then place the cut must be opened varnish.
9. 're nail trims to the façade using furniture nails without hats.Moreover, it must be done so that the staples are closed.

Facing ceramic tile facade

To do this, you must first remove from the kitchen cupboard door hinges.Then clean the surface thoroughly.If necessary, the door can be painted in the desired color.Then the tile is glued to the front on the tile adhesive.It is desirable around the laid material to make the frame of a decorative molding.This work can be considered completed.

Update by replacing kitchen fronts

This is obviously the most expensive way to upgrade the kitchen units.However, it will be much cheaper than buying new furniture.If you like facades are no longer sold, they can be made to order.If you want to save, you can use an inexpensive wood, such as pine.For this purpose perfectly suitable plastic or chipboard.

Installing kitchen fronts can be charged by professionals, and it is possible to do this with their own hands.To do this, remove the old door.They usually stay on the screws.So we have to unscrew them.As a rule, garniturnaja door and front wall of the boxes in the shops are sold in raw form.Therefore, you will need to perform these works themselves.To do this, you will need a core cutter Ø35 mm.For hinges drilled new holes, and then to the walls with screws screwed door.This can be considered the installation of a new kitchen complete the facade.

facing front with the help of film

Reload kitchen facade is possible by means of self-adhesive films.This material is easy to buy, and he has a good performance.It is also important the fact that today in the sale is a huge range of these films.Before you paste, the facade should be removed and laid on a flat surface.All existing hardware must be carefully removed.Then facades should be thoroughly washed with soap or soda.Then use a soft, until they are dry.It is equally important to degrease the surface.When this is done, you can begin to cut out the desired elements of the film.Obviously, with coloring should be defined in advance.

When the elements are cut, they must be put on the front surface of the facade.Laid film is lifted from one side to peel the backing paper.Unstick should gradually, at the same time pasting on the surface of the vacant part.When the film is finally pasted, it should be aligned with a clean cloth or spatula.Movement in this case must be from the center to the sides.

Update with paint

Kitchen facade it is possible to refresh just paint it.This is an easy and at the same time quite a radical method.For this purpose, you will need paint thinner, sandpaper, operation.tools and accessories.As paint can take the enamel, car spray or acrylic paint.

Before painting still should conduct preparatory work - Remove the door and unscrew them from the loop.Then you need to properly wash the facades, which have been withdrawn, and degrease using a special solvent.When the facade is dry and grease, all the facial plane needed a good clean using sandpaper.Thereafter the resultant fine powder is recommended to remove, after which the surface is degreased again.

When the above is done, you can apply paint.Moreover, one should start with the hard to reach places, and then gradually move on to flat surfaces.When the paint is applied and dries, you can do decorations.For the application of patterns is recommended to use stencils.This decor will look good on the furniture from MDF and wood.When the kitchen facade will be completely renovated, fittings can be installed in its place.

Terms care

Proper kitchen facade care can prolong its service life:

1. example, a kitchen set of materials such as chipboard and MDF can be cleaned using a conventional sponge, coated with her cleaner.After all, these materials are not left traces in the form of fatty streaks.