Metal picket fence with his hands

picket fence made of metal is very relevant in our time, because it differs from the other protections that do not need to spend a fortune to the material and to buy the necessary tools.This fence has become topical as Protection functions (construction of the fence is very easy, but penetration through it and not so easy, because the distance between the bars close, there are sharp tip), decoration, light and duration of use.

Fencea metal picket their own hands will bring you great pleasure, because you will not only save, but also feel a great pleasure in the done physical labor.

For the construction of the fence you need to consider all the details: from the perimeter enclosing territory, its appearance, the number of building materials and finishing the calculation of the duration of the work.

Tools Required

To facilitate the understanding of the construction of a metal picket fence with their hands, you can see the photos in this article or watch a video that will help in this rewarding and enjoyable experience.For the construction of the fence you will not need a lot of tools, but there needs to be:

• tool to work with the earth.He will need you to set the poles for the fence support.It will also need a drill or ordinary shovel (for digging wells);
• welding machine (for the establishment of cross-lag, to which will be attached shtaketiny).Welding is the best option for this to work (cheap but good and reliable);
• screwdriver (needed during the installation of the mounting shtaketin metal carcass).Using a screwdriver, here too it is possible to do, but it will give you a worry-free;
• auxiliary small tool that should be available to all hosts in the arsenal and will be required to install a metal picket fence.

Materials

to install metal picket fence with their hands, you should be provided with the following materials:

• pipe section 60 x 60 mm (profiled).In the construction of this fence is low enough weight, so this section is quite right for you, and be able to withstand wind loads.
• shaped tube section 20 x 40 mm (required for installation of longitudinal lag, due to which are attached metal shtaketiny).
• Metal shtaketiny (produced at the enterprises of the steel 0.5-2.0 mm thick).Metal top is covered with a special layer that protects against corrosion, and then painted powder paint in the idea.
• Galvanized screws (for mounting the metal shtaketin to the frame).

Instructions for installing a fence of metal picket

When you collect all tools and materials - you can begin to install the fence of metal picket:

• draw on paper, the project of your future protections as relying on their drawings, youYou will make the build process;
• frame set (just for this we need the shovel or drill).Digs a pit, which is 1000-1500 mm depth (the depth of soil freezing), a pre-marked locations.

between the posts necessary to maintain a distance of about 2.5 meters, as the design will not be sustainable.Pits for pillars in the corners, it is desirable to do deep (they load) and on the bottom to put crushed stone and sand.The length of the poles should be calculated so that after you install them, shtaketiny were higher by 100-150 mm.Installation, you have to start from the pillars at the corners and then fill in the support of the cement solution, sand, gravel, or simply ready-mixed concrete from the mixer.With spanned the entire length of the longitudinal lag lighthouse cord, you take the welding machine and the welds along the length of the frame shaped tubes.Welded seams gruntuete.After, dye design and proceed to the final stage of installation.

Take a screwdriver and fasten shtaketiny so that the screws are at the longitudinal lag (distance pick and choose, but it is necessary to leave the 100-150 mm from the ground).

We sincerely hope that our article with photos and video helped you answer the question, how to make a metal picket fence with their hands.

Photo of a metal picket fence

See photos picket fences of metal, made with his own hands:

Video installation of a metal fence picket