Metal fence with his hands

greener and more reliable?Wood or metal?Such questions, for sure, there are many owners of land (and in the future - the owners of country houses) in the selection of material for the building envelope.Those who are more skeptical, reason: "Why should I mess around with heavy metal?I take the board, saw, hammer, nails, shovel, and in half a day "slyapat" Statement fence around the site, separated from the outside world. "However, a more pragmatic owners decide to install a metal fence with their hands.

Why?Fences of metal combine reliability and durability, long life and a very high cost, they are fully consistent with its protective functions.And not the last place is occupied by the visual appeal in the popularity of these designs.What everyone can verify this by looking online photo metal fence, made with his own hands.

More undoubted "plus" of these protections - this diversity.Here and budget option fencing - mesh netting of rolls and exclusive forged gratings, manufactured according to individual orders.And, of course, the most common - fences of corrugated board.How to make a metal fence with his hands, using steel sheet?The installation of such barriers do not require much more skill than the installation of a wooden fence.

necessary materials and tools

Installation Instructions metal fence

first phase of work - site layout and installation of poles, which is used as a metal pipe (standard square or round with diameter min 62 mm).

markings made on the perimeter with a pitch of about 3.0 m.The length of the poles is determined by the sum of two values ​​- the desired height of the fence, "plus", the depth of their installation (recommended to deepen the rack at a distance of more than 1.0 m).

is used two ways of mounting poles for the fence - with or without concreting it.

To install this fence concreting - a prerequisite (a large load on the bearings).Installed metal pipes are checked on a vertical level.

After installing the racks between them are mounted by welding on two parallel bridges, which are fastened with screws profiled sheets.To increase the rigidity of the structure between them can be installed vertically small pieces of a similar tube.Props and jumpers before installing primed to avoid corrosion.

Mounting trapezoidal sheet to the jumpers and pillars is done with screws.Pre-drilled holes of the required diameter (based on - no less than eight units on a profile sheet).

Experts recommend using special screws (with washers) intended for trapezoidal sheet mounting.They protect the metal in the area of ​​attachment of the corrosion processes.When installing the profile sheets are checked for horizontality at the top edge.When the installation is complete, all the fence can be painted.

Video installation metal fence

Video installation metal fence with their hands, all the necessary operations in the sequence can be viewed below.

Photo Metal fence with their hands