A fence made of bricks with their hands

Reliable fence of his house or plot the most important task that must be done immediately after the purchase of land.The most rational solution in this case will be the use of a brick fence.Carrying out the installation with their own hands will not be difficult, and the resulting object will be long and reliably to its owner.

So, how to make a fence from a brick with theirhands?The first thing you need to owner - is to buy materials.It takes a mixture of cement, bricks, sand, gravel and natural valves, which will be the "carrier" component for the fences.

Buying bricks will be determined by the parameters of the selected material and the size of the fence is being built brick by hand.Depending on the thickness (in one or two bricks), height (can be more than three meters) and a length of fencing, and the parameters of the material and not count the quantity.

instructions on building a fence from a brick

To begin to build a fence from a brick with his own hands, it is necessary to carry out installation of the foundations and supporting the valve.

marked on the territory which must be perfectly flat, put a mark under the "pillars".They may be located at a distance of 1.5 meters to 4 meters.The excavated depressions (1.5 meters deep each) inserted into the support.It is exposed and the level and inclination relative to the other elements.It is worth remembering that it should be formed perfectly smooth line and a series of completely flat.

After leveling in a slightly extended recess is filled with gravel and sand.These layers are compacted for maximum structural strength.The first step is the construction of a fence from a brick with his own hands is completed.You can start pouring the foundation.

most practical option would be the installation of the tape substrate.To do this, dig a trench for installation of formwork.After the sand settles cushion for a more reliable and secure only after this is done reinforcement.

Once reinforcement is necessary, can be made concrete and pour into the prepared foundation, ie it is necessary to pour concrete into the hole and socket.Curing design will directly depend on the materials used and the depth of excavated area.Frequently used parameters - a depth of 50 cm and width 25 cm.This stage of manufacture of a brick fence with his hands, a video of which is in the article, can be studied in more detail.

After complete hardening concrete can proceed to the immediate laying bricks.But between the received base and the main part must be placed high-quality waterproofing.For this task, you can use a roofing or mastic.

The simplest masonry - single-level execution is offset by half a brick.It has an attractive appearance.materials can be used to create different colors and patterns as desired.

Construction begins with the basic components for lining.It will take four elements to impose each "pillar".On the base and between the bricks should go to concrete.This compilation should be dense.It is necessary to carry out the tapping to evenly distribute the mixture and its partial compaction.

first row is laid from post to post.Next over the first layer by analogy.And so to get the full enclosure.Do not forget that the top can be both simple and made in the form of a small projection.To do this, put a brick laid across previously.

The options are many and varied fences of brick your photo arms, which are presented in this article will help to determine the most suitable type.

photo fence made of bricks with their hands

Video building a brick fence with their hands