Build Daily

Интерьер

August 12, 2017 18:06

Build a niche in the wall plasterboard with their hands

Build a niche in the wall plasterboard with their hands

If you know how to do niche plasterboard with their hands, you can create any room in your apartment original design at a reasonable price.

As plasterboard is easy to work with, and it is inexpensive - this material is the best for decorating.

Options finishing drywall, there are many, and niches - one of the most popular.

Especially often found a niche for a brick wall, which work with the most difficult.

Nishi not only attractive but also quite practical - they can be built, for example, a shelf in a closet for storing hygiene, or to put a cabinet or other furniture, depending on the size of the structure.

manufacturing process is also not too difficult, so you will easily cope with it with his own hands.

In this article you will get instructions on how to make a niche of drywall and will be able to put it into practice in his apartment.

preparatory work and a framework for niche

The process of plasterboard work presents no particular problems, but the preparation should be taken carefully, and then you will not have a question: how to make a niche in the wall?

First of all, you need to decide on the design and niche device, as well as its purpose.

Photo:

Decorative niches can often be found in the living room orbedroom - in such areas can install shelves, or simply paint the design.

more functional shelf can be found in the bathroom or the toilet - there can be placed detergents and hygiene products.

Sometimes a niche in the wall make a dressing room or closet - this design should be more impressive size, and make it better in the hallway or in the balcony, to save as much as possible living space.

Also, there are devices for windows and decorative niches for curtains, which also act as an original decorative element.

Once you have decided on the size and shape you need to make the frame for the niche.

Whatever her views you choose: a niche under the wardrobe, functional shelves in the closet, box for curtains or just a decorative element, the framework will be necessary.

properly made frame provides structural stability, durability and an attractive appearance.

For its production, you will need the guide profiles, which are necessary to secure the construction of the walls and give the article the desired contour, and profiles, giving rigidity and drywall itself.

fit the size of 12.5 mm sheets to create the design.You can buy both regular and waterproof material.

drawing Example

on brick or other wall, to which the design will fit better to put contours of a future niche to work it was more convenient.

Draw all the parts of the design: shelves, if any, additional elements under the wardrobe, etc.It is better to not be lazy and do everything carefully, then install design with their own hands will be easier.

along the contour of the guide you need to set profiles, and fasten them with dowels.

Where straights, just work harder to be if you are doing a curved frame - then you have to gently bend the metal profiles arc.

can do this, notched material in increments of 50 mm, or by purchasing the finished design the desired shape, if you do not want to work on it with your hands.

profiles installation field to do surround frame according to the size that you have chosen for the depth of the niche.

on the ceiling and the floor is necessary to fix the guide profiles to their ends were exposed vertically.

In addition to volume, at the same time you need to do and the front plane of the niche that you want to be completely smooth.

angles made of twisted guide profiles.The shelves should be placed at 90 degree angles to each other.

angular elements must stand vertically and be coupled to the upper and lower profile and located on the ceiling and on the floor.

niche frame

have to check how well they are installed in two areas: on the front and side surfaces.

After that profiles need to bond with each other and with the corner post using screws.

Mounting shelves, paneling design, design

Once you have made the frame surround and hard, it is necessary to make the shelves.

shelves of manufacturing technology in the closet and a decorative niche and the same occurs in several steps: the first step is to set the shelf plane with the level and self-tapping screws.

Photo:

After correct positioning is necessary to enhance the shelf with the help of the supporting profiles (this is especially true if you are doing a wardrobe, whereload on the shelf will be somewhat higher).

Sheathing frame plasterboard done simultaneously with its manufacture - it is more convenient and faster to work with your own hands in this way.

Before starting the installation, the entire interior of the niche you need to sheathe plasterboard - it is easier to do this is one solid sheet than to sheathe sliced ​​materials, so keep that in mind.

In addition, design, fine solid plasterboard will be tougher.

The smaller your frame joints, the easier it will be to sheathe plasterboard - this applies to all articles of this material: decorative niches devices under the wardrobe, boxes for blinds on the ceiling, etc.

Decorative niche shelves in a closet or wardrobe can be done with lighting - it needs to carry out all the necessary services at the stage of installation of the core.

If you want to make sound insulation, in the framework of emptiness need to lay mineral wool.

Location lamps may differ, depending on the type of design: decorative niche often sheathe the perimeter, in the closet, you can install shelves lighting and curtains to decorate a box for the top lamps.

can reflect the illumination system in the scheme in advance, and then to mount her own hands was easier.

Video:

Noise - an optional step, but if it do not, then you need to be prepared for the fact that at the slightest contact with the subjects, drywall will emit a hum - it is not too much, if it is decorative orcurtains.

However, if you make it, for example, under a shelf in a closet or wardrobe, the insulation is still desired.

niche plasterboard frame Boarding takes place in several stages: first you need to dock parts of drywall.

Where parts of the material are connected, you need to make additional stiffeners, which are then bolted on a separate fragment drywall.

If you do not, then eventually the material will go cracks, even if the seams are qualitatively repaired.Lack jointing also leads to cracks.

to them was not, where sheets of drywall are joined, need to be chamfered.Then you need to set the size of 150-200 mm screws.

last stage - decoration and finishing.To paint or other coating that you choose to furnish a niche, well laid down, initially the surface to be processed putty.

From it can be waived only if you are going to stoning gipsokartom stone or tiles.plastered surfaces often - more time-consuming step, than the assembly, installation and frame cladding.

Video:

necessary to carefully handle the corners and joints, as well as seal the filler even the smallest irregularities drywall.

trimmed with plasterboard can be almost any material.The most common option - simply paint the surface in the desired color.

Niche for curtains can be contrasting and shelves in the bathroom - on the contrary, the color of the trim.Wardrobe often painted wood, and inside, you can cover a niche wallpaper the color of the room.

Often niche plasterboard equip around a brick wall - it can be in the hallway or bedroom.

In this case, the wall can be left as it is, especially if the room is decorated in the style of a loft or the like, and a niche to paint in the color of the walls or paint patterns.

work with plasterboard just not only in the creation of niches, but also in the decoration material, so make a clearance with his hands should not pose difficulties.

Photo:

With drywall, you can give the apartment a unique designcreating niches in different rooms for curtains, a window, closet, shelves in the bathroom or hallway, decorative niches under the TV and other equipment, etc.

opportunity to work with plasterboard weight and simplicity makes it the ideal material for creating designs with their own hands.