Build Daily

Types Of Jobs

August 12, 2017 18:08

Venetian plaster , applying technology or secrets of the correct finish

click fraud protection

Venetian plaster - application of technology for non-professionals

First dot the "e" - Venetian plaster is not rough primer for frescoes and not tolerate irregularities on the walls.Before making Venetian plaster, needed to achieve perfect smoothness of the surface by any means - sanding walls or Shpatlevanie.If you intend to align the walls of plasterboard - it is remarkable, it will lie perfectly Venetian plaster technology application which only requires smooth walls, regardless of the surface material.However, to the plaster is well kept on the wall, you need to prepare a special primer base (one or two layers), or just gently cover the wall of acrylic or vinyl paint for her.If the surface of the drywall painting would be the ideal option.

I must say that a few easily understood transmitted the text of the application technique of Venetian plaster, and only the video will be able to more or less accessible way to convey all the nuances.In principle, there is nothing surprising, because it is better to see once, than hundred times to read.Methods of application Venetian plaster video will give better than even on the detailed illustrations.Sometimes it is impossible to understand the drawings or photographs, what action should result from the image.But something can be available in text form.

In particular, it should be remembered that after the preliminary application of the primer or paint, you should wait for the complete drying of the surface.Next - just work with Venetian plaster, first layer must be applied evenly on the wall, followed by a thorough cleaning it, ideally with the same spatula, which is applied to the wall structure.Here, the main thing is not to overdo it and do not clean off the wall all the applied layer, simply do the smoothing movement, so that there are no unnecessary protrusions.Followed by finishing layers, which determine the future of the beauty of the room's walls.

How to apply Venetian plaster, when there is no experience

How many layers can be decorative Venetian plaster?Counting is very difficult to do, because the layers are applied randomly, like paint brush strokes on the canvas, with the only difference being that each layer should be as thin as possible.To finally get a pattern imitating natural stone, finish the walls with Venetian plaster should be carried out short arcuate strokes .In the process of overlaying layers of different sections of the wall surface will get darker or lighter tone, which eventually will give a very interesting texture.It is best to applying Venetian plaster reflect the videos showing the process of finishing in the smallest details.

Since finishing implement of the entire wall is not possible (of course, if you do not perform the work of ten people at a time, more than interfering with each other than helping), cover the plaster wall is recommended to small areas, up to 1 square meter.At the same time, making the strokes of the second and third layer, should increasingly move away from the edge of the area, which is bordered by a wall of pure, so that later, when you move to the next chapter finishes, you on the edge of the new site was only one finishing coat of plaster.Then you can easily combine the two areas into one seamlessly.

Decorating the walls Venetian plaster in the last stage

would seem all the walls already thoroughly covered with plaster, and overlapping layers no one would undertake to count, but one feels that is still something lacking.This is understandable, because the final finishing of the surface has not yet been made.To her and should go after drying the latter superimposed layers.If you are in the very beginning it was a perfectly smooth wall, so she must stay behind and after finishing the walls of Venetian plaster.To do this, take a fine sandpaper and gently in a circular motion, starting to wipe the surface to not erasing any of the layers to smooth the work performed.Some may recall that before, how to apply the Venetian plaster the preparatory layer cloth use not recommended - and so is now possible and necessary.

When the wall becomes Gorny, as the baby's skin (not immediately after birth, of course), you should carefully wipe it clean with a dry cloth to remove the resulting as a result of working with sandpaper dust.And finally, the last stage - the application of wax, without which the Venetian plaster to remain durable and breathable material, but, unfortunately, unable to tolerate dampness.The choice of wax depends on what you want to see the wall.Natural beeswax will prevent the plaster from moisture , but not from the constant moisture, so it is not suitable, it is better to use synthetic waxes for the bathroom.Thus from beeswax plastered wall gets glossiness, and from synthetic - haze.

find out how colorful waxed Venetian plaster, coating technology is common on video.Properly applied thin layer of wax gives transparency plaster, but it should be remembered that to the walls, covered with wax touch can be no earlier than six hours later .And in a day room can be used for other purposes.In particular, for admiring a successful outcome of your work.

instagram viewer