Textured plaster and complexity of its choice

What textured plaster walls in the interior is better?

rough surface svezheoshtukaturennyh walls will look great in any room, but in the bathroom, where all surfaces are regularly exposed to moisture, it takes more reliably lining.And in the kitchen, which also has a place pairs, along with the smells and splashes of cooking?Debatable, and it is primarily dependent on how heavily used the food unit, and what basis you have selected mixture.Before you make a textured plaster or use a ready-made, compare different options.

So there are four of the most common and widely used type of plaster - a mineral dry mixes and ready-made acrylic, silicate and silicone.Someone does not trust the prepared formulations, as a stereotype, if such plasters lose quality during transportation and storage.

However, each solution has its own expiration date printed on the packaging, and in its limits remain unchanged.Acrylic textured plaster in the kitchen will be applied without any difficulty, and most importantly, keep it will be very safe, even without any preparation of the walls.Why do we have noted this option?Let's look at all the details.

Decorating the walls with plaster texture - you need to know?

Pro mineral compositions most home masters knows firsthand as necessary to regularly use them for small needs.As a result, and dry mixes are used for large-scale decoration.However, such finishing require careful advance preparation, which includes priming.Do you need extra complexity?

Acrylic finished compositions having high climate resistance, sold in plastic sealed containers, they can be applied to the surface as soon as you have printed packaging.And there is no need to very carefully clean the surface, and do not need a primer.Conveniently?Undoubtedly.

different primers are used for mineral plasters, depending on the composition of the mixture.Applying properly matched primer, you degrade the adhesion of finishing the mixture to the surface.

remains to consider the silicate and silicone mixture.The first of these seems to be all good - made on the basis of potash glass (viscous, of course), it can be applied on old mineral coatings, and at the same silicate finish.However, even with its excellent water vapor permeability using this plaster rare because it requires a silicate coats and coloring materials on the same basis, but still is considered environmentally harmful.

Another thing silicone compositions, they also have high adhesion and dispersion with mineral bases, perfectly passed pairs, but, besides all this, have also stain-resistant properties, along with moisture resistance.The only drawback - a very high price and the need to use a silicone primer.

Which flow textured plaster can be expected?

Even if you mortar acquired at a very low price for all its high-quality, early finishing works usually shows that did not stop to buy more.How to calculate the consumption of textured plaster with the highest degree of reliability, not to take it too much, spending extra money, or too little, then losing time on the tour for the next batch of material?First of all look at the packaging or ask your adviser, you may just get a comprehensive answer, how many kilograms of a mixture of leaves per 1 square meter.

In general, be guided by it, what kind of grain mixture chosen you to finish. Based on the fact that the layer of plaster usually corresponds to the grain, which can be up to 5 mm in diameter, will accordingly flow .Fine grain finish will be the most economical, although less spectacular, as part of a large fractions of the filler may require the application of up to 2.5, and even plaster 3-4 kg per 1 square meter.