The unusual design - plasterboard ceilings duplex

Ceilings plasterboard duplex - what is and what is done?

usual ceiling - it is simply mounted horizontally on the bottom surface of the sheet of drywall ceilings.Generally used for mounting various profiles and fasteners by which the elements forming the skeleton, not only is rigidly fixed to the ceiling, and arranged perpendicularly with respect to each other.Is that enough to get a perfectly flat surface?Undoubtedly.Can this be called a ceiling design solution?Hardly.

To create a unique style of the room requires not only high-quality finish of the walls and floors, as well as well-composed interior, but, at least, of the plasterboard ceiling split-level, that is made by the steps.And if to them to add lighting elements, staggered for the erection of the structure, the room will receive exactly the unique style, to which so many aspire to home, without much, however, succeed.

properties can be given different construction, even such as water resistance, despite the fact that the material was made on the basis of plaster.The fact is that before there was only one type of drywall, but it was at a time when the material is just beginning to be developed.Today it is possible to name at least four types: the one usual further moisture-resistant, flame retardant and then finally universal sheets combining flame resistance and water resistance simultaneously.

differ in color, these materials: conventional drywall - gray with a blue sign on the back of the plane, a water-resistant - green with a blue sign, fire-resistant - gray with a red sign, and universal - green with red markings.As you can see, everything is simple, to inspect the sheets of material quite carefully and take the ones that you need.

What shaped frame ceiling?

As already mentioned, the drywall is mounted on special metal profiles, thus they are completely hidden under the cover sheets from the outside are only visible screws, and then only until such time as will not be smeared with putty.However, what is still a part of the frame, from which elements it is going?Formative

only two types - a guide formed in the shape of the letter U, which are needed for placing them all in the ceiling profile which has a C-shape and, in fact, just the frame of the structure.Runners have a hole diameter of 8 mm for fixing the profile to the wall, but form the frame elements in the holes do not need, but a little later on this.

very important items for compiling multiple ceiling levels.Most of the elements used to connect profiles perpendicular to each other duplex and single level.The first need to go to another level of the ceiling, and the second - as a crosshair for four profiles converging at right angles in the same plane.

Very often one-sided demand elements for the connection at right angles at different levels, as well as turning the fasteners of the same kind that can be used for the installation of vertical plates of plasterboard. For fixing the frame on the ground, in addition to mounting angles are used, and the anchor hangers, can withstand up to 25 kilograms, a step between them depends on the design gravity.

Typically, 1 square meter of false ceiling weighing about 13 kilograms.

As constructed multi-level ceilings of plasterboard?

First of all, let's define that there are two-level ceilings, and there is such a thing as a two-tier framework.It's not the same thing.In the first case we get a difference between the levels of arrangement of sheets of plasterboard, and in the second encounter with the designation method of attachment to the main supporting profile.Actually, we need something, and the other, the first as a result, and the second, as a means of achieving it.

So, we need: shnurootboynoe tool that will allow us to fine-base layout, construction knife roughing plane, handsaw, a drill (preferably in combination with a screwdriver) with a nozzle mill, grinding tool, container for putty and putty knives.Well, of course, sheets of drywall, as well as profiles and fasteners, along with self-tapping screws, piercing and boring.

To start measuring the ceiling and the ceiling design make up what we want to see him in the end.Make marks on the ceiling, which must pass the basic profiles and guides, as well as determine the location of the anchor hangers. Support profiles are mounted in increments of 50 cm for laying sheets across and 40 centimeters increments at the location of the sheets along profiles.If the base concrete, suspensions mount dowels or anchors if the surface of the wood, it will be enough screws.For pre-drilled dowel holes using perfodreli.

When suspensions are fixed, set profiles, constantly using the level of no less than 1.2 meters, a laser instrument for the same purpose.The frame can be single-level or, as we have said, the two-level.In the first case used a crosshair perpendicular to the connection profiles in one plane, and in the second we need duplex fasteners.The profiles are fixed to each other by self-tapping screws that are easy to pass through the thin metal.

rails installed on the perimeter of the room to fix both core and support section.When the first level of the frame is assembled to him, but not to the drywall, begin to strengthen the framework of the second level, giving it a form, which is scheduled.To get the arcuate bends profile, do it nadpily, turning 90 degrees, so it really has become C-shaped.We can assemble multi-level ceilings plasterboard with any number of benches.

When the entire frame is fully assembled, it is attached to the cladding sheets with pre-drill them necessarily, but to saw and desirable to make holes in a timely manner.After the sawing process the edges of sheets Rough planers, drill holes for ceiling cutter attachment for drills.

When installing screws do not utaplivat age, but do not leave the speakers.Joint sheets should occur exactly at the center of the profile, so that the screws came from its edges, far enough away from the seam.After the installation is pasted on the joints and serpyanku shpaklyuem.