How to whitewash a ceiling

materials whitewash

Responding to a question about how to whitewash the ceiling, the other one might associated with the necessary materials used for this purpose.

most frequently for finishing in this case is used slaked lime, often - ground chalk, glue, and various dyes, pigments.Among them is very popular regular "blue".

At the time, became widely used polyvinyl acetate latex paint.The common people - "vodoemulsionku".Its popularity is due to simple and logical.It dries instantly, suitable for coloring concrete, plaster and even brick.Covered with a painted surface can be washed.

Preparatory efforts

Before whitewashing the ceiling with your hands necessary to carry out complex preparatory work.For starters need to wash the old, overage whitewash.For this fit the warm water.It is important not to miss any plot.Plaster smoothed ordinary piece of wood.With a spatula or knife being cleared cracks.Podmazki prepared for their termination.

How to whitewash the ceiling chalk

must not forget that if the ceiling above belilsya lime, the use of chalk is not allowed.Otherwise smudges formed without fail.

for sealing putty is better to buy ready-made, but you can prepare a simple structure at home.It will take 1 part of plaster, 2 pieces of chalk, wood glue, 40-50 grams of which pre-bred in a liter of water.The composition is mixed and ready for use.Dough by using a spatula gently crack filled flush.

Once dry puttied surface ground.Use soap, copper and vitriolic composition based solution of alum or ready primed, bought in a store.

When using the composition based on copper sulfate to perform priming centrifugal brush approach, in the case of a soap composition - vacuum cleaner.

primer should dry thoroughly.It will take about a day.Grease space allowed clean cloth or a pumice stone.

Whitewashing the ceiling latex paint

addition of lime and chalk callers widely used latex paint.Apply color to the ceiling more appropriate time (2 or 3), making it slowly in order to avoid sagging.The first layer is better to put a roller or brush, the next - spray, keeping the distance.Came the need just tiny droplets.

whiten entirely by hand using the best roller.Pre color is poured into a plastic tray.It dip roller.Excess color is pushed by a roller rolling on a special mesh inclined surface provided in the bath.

Then, roller work as a brush.The painted surface "output" becomes matt ebb.It is necessary to give Kohler a good dry.Force should not be events here.Try to avoid drafts.From the window of the sun hit the direct rays can darken.Ignoring these simple rules, you run the risk of delamination of whitewash in the future.

How to whitewash the ceiling in the bathroom

to whitewash wet areas such as bathrooms, a conventional mortar is not suitable.It is ideal for dry rooms only.Paint the ceiling is too short-lived dream.Indeed, many colors are not able to tolerate the hot steam and high humidity.

ideal option would be the use of high-quality acrylic paints.They are made on the basis of water and are designed for rooms with high humidity.The very paint is easy to apply, dries quickly, has a beautiful view.Some even protect the ceiling from the appearance of mold and mildew.To improve the aesthetic appearance of the application of such paints are easy to create smooth transitions from one color to another.

final decision on a specific finishing ceilings in this or that case, each taking to themselves.