Build Daily

Types Of Jobs

August 12, 2017 18:08

Plaster plasterboard with their hands , in which case it is carried out ?

plaster walls plasterboard, and whether it is necessary?

Applying plaster on drywall rather laborious process and not always effective.For example, if the wall is made of cheap material, is not resistant to moisture, sooner or later, the surface cracked and deformed.Therefore, it is important to cover the plaster is only water-resistant gypsum board quality, really in need of finishing (if any irregularities and potholes).It is also necessary to use special primers.If you intend to

decorative plaster walls (not as a primary coating), then this method of decoration is acceptable.To this end, it is important to apply it thinly with strict observance of technology, which we describe below.In the process used by all sorts of decorative plaster, simulating a particular surface.

In some cases, apply the plaster on drywall?

If walls have small dents and gouges , as well as some irregularities, they are first sealed with putty, then applied a thin layer of plaster.In this case, it is permissible.If the walls, on the contrary, have large dents, displacement and distortions, the finishing plaster surface not solve the problem even worse.Large curvature corrected by reinstalling drywall sheets.

Also, as has been said, is possible to apply plaster , as it has a composition that provides a rapid polymerization and drying.Plus, it is applied to a thin layer.Therefore, when it is applied on a plaster wall, the negative effects are observed.

Technique plastering

If you still understand that without painting works can not do, it is necessary to perform the application of the rules.Pre-clean the surface of the dust produced during plate mounting.Most often, this time with an industrial vacuum cleaner, but if not, then can be applied to any means at hand (cloth, slightly dampened with water).In the second step commence putty irregularities, joints and seams.

This solution plaster wall may be prepared from a dry mix and liquid ready taken.It is worth remembering that the dry product must be diluted with water immediately before.Initially putty composition fill small holes and seams.Once it solidifies in these areas begin to cover the wall of the leveling layer.Further, the foundation soil (as preparations for the plaster).To do this, pick up special priming solutions designed specifically for this material.

example can be acrylic primer (Tiefgrund LF).They penetrate deep into the surface, dries quickly and well strengthen it.At the same time they also provide excellent adhesion to subsequent finishing plaster.Best of all, this process is shown in the video, drywall plaster which is carried out according to the rules.After watching the video tutorials, you'll have a clear view of the technology.

Note!All of the above work should be carried out under appropriate conditions - at temperatures between + 5 ° to + 35 ° C and moderate humidity.Also it is necessary to take precautions: wear rubber gloves and a gauze bandage is desirable.After performing tools thoroughly washed with water procedures, materials tightly closed in banks and stored in a dry place.