How to make an aquarium at home?Aquariums with his own hands : video

Where to start to make the aquarium?

First you need to define the appearance and size of the future abode for fish.The most popular form of aquariums:

• corner;
• in the form of a circle;
• in the shape of a rectangle;
• panoramic.

design round types - aesthetic element that is able to fit into every interior solution.But in order to make it a special equipment will be needed in a home.This additional costs that are not wanted.Aquariums panoramic and angulation complex in execution.To build an aquarium without flaws need expert hands, because here's the rub in the manufacture of the frame elements.

For beginners in the creation of aquariums ideal option is to create a rectangular aquarium.They are not only easy to do in the future will not have difficulties with the service.We recommend using one of two methods of creating a tank: a first member that is glued to the bottom wall, and the second - they rest on the bottom.Both methods show the effectiveness, however, you should try to do so.

choice of materials for the aquarium

first should determine the choice of glass for your design.The quality of the glass increases with its variety.The quality of the glass can be higher and M1 to M8.Do not take up the case, if you have purchased the glass below the M3.As a base material can be selected glass of any composition, the fish will not be to sort out where they live.It is important to select the correct width of the window.It depends on the quality index of the glass from the scope of the future of the aquarium and can be calculated from the table.The formula for the volume: V = l • and • h.

addition of glass for the construction of the aquarium need stiffeners.These are strips of windows that are intended to strengthen the walls of the aquarium.Their width should not be greater than 5 centimeters, and a thickness equal to the length of the inside of the reservoir.If the aquarium is more than 1.5 meters, for attachment to the stiffeners should pick up screed.These are the same glass strips that attach to the bottom of the ribs.

For bonding glass elements need silicone adhesive manufactured specifically for aquariums.He will ensure the structural strength for many years to use the aquarium.In addition, such materials will be needed: napkins, a syringe, a degreaser.

aquarium manufacturing technology

Step 1. Cutting glass

If you have no experience in this kind of work, be sure to ask for help from the glazier.Do not risk, because it can cause damage to the material.If you do decide to take this step, you can make cutting thus:

• in relation to the size of the structure to cut the wall;
• perform cutting bottom is according to the size, keep the distance to the adhesive;
• observe identity bottom width and height in relation to the width and height of the end walls.

In implementing cutting should not forget about the thickness of the glass cutter, it is usually no more than 3 millimeters.On the borders of the lines should be carried out with a small glass cutter pressure, if it does not comply, the glass will break on fresh cut line.When administered stekloreza at some distance from the window, there may be a crack.Due to such nuances do not recommend their own take on the matter immediately.It is better to gain experience by trying to cut the individual lengths.

After the glass cutter along the lines to break the glass, not letting it cool.Put this glass is put on a flat surface so that its border coincides with a fault line.Then surely break off a piece of glass, pre-glove protecting the hand or a piece of cloth.

Step 2. Merge pond

After the cutting of glass, process sheets degreaser, in which can be a white spirit or petrol.Then wipe the surface with a cloth made from natural ingredients.The front wall should definitely grease sealant strictly on line for attachment to the bottom.This precaution will save the owner from the possible formation of a leak.

aquarium Bonding seem not so difficult if you use a high quality silicone adhesive.In order to achieve an even layer, must use a tool which dispenses the adhesive.Prior to complete drying is not recommended to move the next body of water to fish, so for bonding to choose a neutral place.

Step 3. Fasten stiffeners

are waiting for day, before continuing.This is necessary for the complete drying of the glue.Then fasten stiffeners, if the tank height is greater than 50 centimeters.Bonding of edges is perpendicular walls.Fixing takes place on the front and rear walls.

construct put to one side in order to provide convenience bonding ribs, after which a lubricating strip with glue.We are waiting for a couple of dry days, and then remove the blade remains of sealant.After fixing ribs prepare for the aquarium lid, which can consist of metal, wood and other materials.

Aquarium is ready and now you can fully enjoy the results of your labors.With imagination and currently available materials can create a wonderful home for fish, the aquarium decorations simulating vegetation or rocks.