Installation of PVC panels to the ceiling - what is the sequence of work ?

Stucco PVC panels: what is the advantage?

If we consider the characteristics of ceiling coverings, it is possible to see a number of advantages.Firstly, panels provide alignment surface.Even if you did not originally perfect base, it easily can be hidden under the panels.Beneath them is usually hidden wiring, some pipes and cables.Secondly, it is very resistant coating .Even the drywall with it can not be compared.Because PVC panel gets excessive moisture is enough to remove them and dry.

Then they are easily mounted back.This can not be done, for example, with whitewash, or the same drywall.Thirdly, provide soundproofing , which is created by the fact that an air cushion between the panels and the ceiling.That's why you can not hear different noises.Fourthly, durability of the coating .It will last for many years, and in case of any breakdowns panels can be easily replaced.And, fifthly, installation is carried out simply and quickly .

Installation PVC ceiling panels: the preparatory work

So you understand what you need to cover this, the question arises - like sheathing PVC ceiling panels? For this initial step is to prepare the foundation of a number of binding instruments.These include: self-tapping screws, hangers, construction water level, hammer, screw anchors, the typical triangle, paint the cord, metal profiles, screwdriver.While PVC panels themselves are kindly requested to take out of the boxes, so that they "lie down" and "acclimatized."

Next, you need to prepare the ground itself.First, it is important to determine the ceiling will be warmed or not?If so, select appropriate insulation material.The best option is considered penofleks or penofol.Next, you need to prepare a crate, a so-called box.It is through him and will be fixing PVC panels to the ceiling.How to do it?

Determine the horizontal by measuring the height of the room in all the corners.Choose the smallest value.Further down on this mark lay 5 cm - it is level horizontally.After every corner makes such designations, points are connected by means of a paint cord.According to this line of drilled holes into which are inserted and screwed into dowels.Then, around the perimeter are fixed UD profile (preferably 28 mm).

Next set suspensions.They are necessary to keep the ceiling profile (DM - 60h27 mm).Mount them in parallel rows, the distance between them should attain to the level of 60-70 centimeters.Next, attach themselves SD profiles.Thus suspensions should first bend at an angle of 90 degrees, and then ends bend in opposite directions.That is, the bent portion of the suspension parallel to the ceiling.In the final step, the headlining PVC panels.

As hem ceiling panels PVC?

Thus, frame is ready, it's time to start the installation of the panels.The project is not so much time and physical effort as the main work has been done.It is only necessary to take advantage of our tips.Laying of PVC panels to the ceiling is carried out by fixing them to the frame with screws.Strips arranged in a perpendicular direction from UD-profile.

important to note that all PVC panels for ceiling should differ perfect evenness and not have any defects!Take care of it for another purchase stage.Carefully check the material.

Alternately panel inserted in profiles and fastened together to form a single coating.Sami junction can be hidden under the frieze, which the paste over all the room on the perimeter.The installation PVC panels to the ceiling over.As seen from the above, it can be carried out independently.