Build Daily

Schemes And Wiring

August 12, 2017 18:06

Heating Scheme of two-storey house - consider the features of the example

click fraud protection

heating system design in modern buildings must be carried out at the stage of designing the house.So you can see what materials and how much you need.In addition, it will help to quickly find bugs and fix them.It is important to choose the best option of the heating system, assessing their physical capabilities, as well as the availability of resources for heating the contents (quantity and quality of fuel, weather conditions, etc.).The most popular today is the water heating option, it is suitable for multi-storey buildings well.Also read about the heating system - "Leningradka".

Driving two-storey house heating

scheme heating House,

Standard wiring of heating elements in a 2-storey house

Sample wiring heating elements

Sample wiring heating elements

Consider water heating circuit standard building with two floors.It provides manual control of the temperature in each room of the house.Set the system in a standard way: with horizontal positioning of the two pipes, in which the radiators are connected from the side.

For heating better to use metal pipes, in view of their strength and durability.But you can use plastic pipes, which also would be an effective solution.Plastic pipes do not require special installation skills, also within them almost never blockage or buildup of dirt.Polypropylene Pipes can collect the most, they are easy and reliable.

At the design stage of the system calculates the required number of corners, drawbridges and connecting nodes of the system, is marked the number and position of the valves and plugs.The analysis of the required number of heating radiators and the number of sections in each of them, from this in the future will depend on the amount of heat, gives the radiator.For each of the heating radiator mounting brackets are set, in an amount determined by the dimensions of the radiator.

Scheme present designation, where the system must be installed boiler, expansion tank and pump.The boiler can operate on different fuels, but the most popular are the gas, solid fuel or electricity.In new houses and cottages of the solid fuel is almost not used in view of its low environmental friendliness.

If the boiler is small, it is possible to install it directly in one of the premises of the house, storage room, for example, or to host a workshop.In this case the boiler is hung on the wall, to avoid wasting space.Not recommended to be put in the bedrooms or boiler rooms such as the library or office.This is due to the fact that the boiler during operation may produce noise, though not loud.Large pots should be placed in a separate room or in a detached building.

Example tank placement in the building

tank placement in the house Example

tank placement: bottom or top.

If your house has a basement and attic space, then you can make the heating system with the bottom distributing pipes or lower at its discretion.

  • If the upper wiring, the boiler is placed in the attic and out the hot water is pumped through the riser to all radiators.
  • If you choose a lower wiring, the tank is installed in the basement and from there via a pump heated water through pipes differs.

Which option would you choose, the expansion tank is always set to the highest point of the house, that is in the attic.With heating boiler at the bottom of its wiring connects the riser.

heating system with one or two tubes

heating system with one pipe is a ring.Water from the boiler is first on one floor, then returned back to the tank through the other.As a result, one floor above the temperature below the other.To compensate for this phenomenon, the lower floors (generally water which is not as hot) put radiators larger than the upper.Moreover, in a system with a pipe not possible to disable one specific heater.It is necessary to disable the entire system.

Sample heating system

sample heating system

system with two pipes is more difficult to install, but it has almost no flaws.two pipes are provided in such a system: hot and cold.Proceeding to the radiator, the hot water is cooled and poured into cold pipe.With this you can block one of the radiators, it will not affect the work of others.

Video - home heating via boiler

Video - home heating scheme

Video - how to make a warm floor in the house

instagram viewer