Build Daily

Building

August 12, 2017 18:06

Sawing slate - the best methods and tools for cutting

click fraud protection

The "home" construction or repair is often used material such as slate.But sometimes it does not need a whole sheet, but only part of it.It is also necessary to do, and some curly "drunk."And here there are difficulties and questions: how and what to do?Try to understand.

should be borne in mind that at present the two types of slate used.The first - the traditional, made of asbestos.The second is called "evroshifer" in which asbestos has not.Slate can be cut in various ways, using various tools.

Bulgarian

should use a circle with a diamond coating.We must bear in mind that will produce a lot of dust.The best way out - to work with a partner.One produces cut slate, while the other pours it with water.This is good for the fact that the water will prevent contamination as the diamond blade.So - will increase the quality of the cut.In addition, the grinder can then easily handle all the irregularities on the edges of the resulting fragments.In winter, this work is best done in the snow.Only grinders will need to push the top sheet.




Slate - than - cutting

electric jigsaw

few inconvenient process, as it requires more time.It is necessary to use a low speed mode and do not press down strongly.

Hacksaw

should use the tool with a fine-toothed.However, it requires the utmost care and deliberation.The main thing - to go strictly on the line, not to split the material and does not break a nail file.

Cutter

The procedure is the same as when cutting thick glass.But cut the slate can be only under the condition that the line is necessary to make a longitudinal rather than transverse "waves".According to the planned line repeatedly pass the torch, and then breaks off a sheet on the line.First you need to still work out on any single piece.

How to cut the slate

without special tools

along the line needs to be done several holes (drill with a drill, nail punch - only special slate).It is advisable to make holes along the line a little more.After that, the sheet edge breaking open bench as well as glass.You can put a rail under the slate and break her.It is better if the holes are small diameter, but they will be a lot - then break the edges are smoother.

general recommendation when sawing

No matter which method you choose and how you will use the tool for sawing, in the process of cutting line should always be moistened with water.And do not rush.

is necessary to consider that during the cutting of the traditional slate stands out in a lot of dust containing asbestos.Therefore it is necessary to protect both the eyes and the respiratory tract from damage.When working with slate need to use protective goggles, a respirator.Hands should be protected by gloves, since the dust enters the pores of the skin.The work should be carried out or on the street, or on a good draft.If the closed-type room, the good ventilation should be organized.

Recommend - video on how to keep the slate roof for many years and greatly extend its life:

instagram viewer