Build yourself - masonry walls of cinder blocks with their hands from A to Z , video

cinder blocks - an excellent building material, which has a number of advantages, than gained popularity among gardeners and owners of country houses.To begin with, this lightweight stone is elementary to make their own hands, what I tell you, and not just to perform and less independent masonry cinder blocks.A team of builders you do not need, and if you want to build a garage, a country house or a more serious building, it is quite cope themselves.Let's start, and look at how to put a cinder block and what tools we need for this.

So, the list of tools:

1. hand circular saw or a hacksaw (cinder block is easily sawn);
2. respirator (required when cutting);
3. building level;
4. water (gidrouroven);
5. hammer or mallet;
6. trowel;
7. plummet (string or fishing line);
8. poryadovkoy.

The procedure works on cinder block masonry

As at the beginning of masonry, exhibit angles, trying to get the right rectangle.Of course, it is expected that the foundation you have already prepared and you spend preparatory work, including waterproofing.In the four corners of the top of laid cinder block, aligned with the level and pull a cord or twine on which masonry is produced.Then put on the solution and the foundation laid with the first rows of cinder blocks.

There are several ways laying breeze blocks:

• to be heaped (without any problems, you can cut off nozhivkoy or circular saw), or a method stretcher;
• bonder - one stone;
• half stone;
• two stone.

In the process of masonry mortar is applied at a thickness of 1-1.5 cm. The fact that a thicker layer of the solution significantly impair the insulating properties of the finished walls, cinder block as the advantage is that it has a void, airbag and which hasexcellent properties of heat preservation.For this reason, it is not necessary to fill the voids in the blocks solution - except a completely unnecessary additional consumption of cement, you only worsen the thermal insulation properties of the wall.

Like putting cinder blocks - take a stone with his left hand and hold the middle of the wall at an angle of 45 degrees, then turning parallel to the wall unit tightly to the previous stone and rattles hammer or trowel handle - for the pros.Excess solution should be removed with a trowel and to use for the following masonry units.After packing the finished wall is filled with fine slag subsequent compacted.

Useful tips

Before starting work in advance consider the platform or the woods, from which it will be convenient to lay the upper layers of the blocks.Ladder not suitable for this - you have nowhere to put a bucket with a solution, it is unstable and it will have to constantly move.

For labels on blocks perfect colored chalk.

If there are any questions, watch the video: