Waterproofing floor in the bathroom with their hands

About a waterproofing can say briefly - it is needed.First, the constant presence of moisture on the floor "spoil" the material intermediate floors.Consequently, the time will come when you need to do major repairs, but it's pretty expensive.Secondly, the neighbors below are unlikely to be cheering loudly when their ceiling once again become wet.All can result in the statement of claim in court, and will have to "fork".Plus broken relationships with others and unnecessary hassle.

To protect your floor from the flow (and themselves - from future trouble), it should worry about the bathroom waterproofing.Given that this work is not a particularly complex event, waterproofing the floor, you can make your own hands.The main thing - to know how and what.To provide waterproofing several ways.In accordance with the specifics of each are determined and the necessary materials and technology of work.

Forms and materials for waterproofing floor

Waterproofing is: corrosion and antifiltratsionnoy.Apply impregnation methods, filling, gluing, coloring.It all depends on the conditions of residence and gender status, as well as your financial means.

Experts recommend when it comes to just about floor insulation, and not the entire bathroom (walls and ceiling), opt for coating any.Incidentally, the materials for this method is more convenient in operation and have a better performance compared with other materials for sealing methods.

well-proven insulation mixture produced in Germany, but also among domestic materials, a mixture of quite good quality.To calculate the required amount of insulating material needed measure the bathroom and count its area.It adopted usually divide the resulting number by 1.5 - 2 (with reserve) to determine the volume of purchases of materials.But it is better to consult with the seller.The main thing - to know the area of ​​the bathroom.

methods waterproofing

Now, briefly about the most simple ways.The most common are two ways.Insulation made with a special mastic or "roll" method.The first method is the most simple and requires no special skills.However, you can use the combined method (so even better): first from the special coating is the first layer, sealed all the seams and joints, and on top of a layer of mastic.

If resources permit, it is better to buy ready-made mixture - it is sold in cans.This will significantly reduce the time spent on work.A more cost-effective option - buy a dry mixture, but to prepare mastic for use will need to strictly following the relevant instructions.Here the main attention should be paid to the correctness of "batch."And the plant itself is better because it will be possible to choose a convenient viscosity mass.If it is not clear what will have to work: brush, roller or spatula construction.

Before you start you need to prepare the floor surface.Previously it has already been applied to the floor, this layer must be removed.Naturally, he is swept thoroughly and then wash.Possibly, two - three times.Apply the "isolation" on the dirty floor does not make sense - it eventually "rise," and the entire layer will be disrupted.

After the floor surface dries well, you can proceed directly to work.It is necessary to carefully examine the entire floor.Perhaps manifest previously unseen holes, slots.To avoid high consumption of mastic, floor better align (putty, cement solution).And then, of course, wash again.

If work is carried out only with mastic, it is necessary to lay two layers - for greater reliability.If it is possible, even three.Note that each subsequent coat is applied only after complete drying of the previous and always perpendicular to it.To isolation was complete, to be processed and the lower parts of the walls, enough to a height of 10 - 15 cm. The result is a single insulating plane with raised walls, which are guaranteed to protect neighbors from flooding.

For simple insulation can use liquid rubber, a number of other materials - extensive selection.Bona fide owner can give such advice.The best option - a layer of mastic, then film, then again mastic (a couple of layers).This isolation will last for many years.

Thematic videos about waterproofing the floor in the bathroom: