The cost of bricks per square meter - the price depending on the type of masonry

Despite the appearance w / concrete structures and other building materials, brick is still a versatile component for the formation of the walls.Make laying their hands is not always possible - the lack of experience, time does not allow you to do this work themselves.Therefore, before hiring professionals to analyze the cost of their services.

What affects the cost of

First of all it is necessary to determine - what factors affect the cost of brick masonry.As with any other service.must be transparent mechanisms of cost.In the analysis of the proposals of many companies can be seen only approximate figures on the cost of brick per square meter.

So before you place your order - you need to specify its details.They can directly influence the construction budget:

• type of masonry.It determines the volume of work is the main factor in the formation of value.
• planned volume.In most cases, large quantities can discuss the discount.Location
• construction site.
• work at height.For the construction of buildings higher than two storeys will require additional equipment and scaffolding.

In addition to these factors in the calculation of the cost may be taken into account the individual requirements of the customer.In particular - the quality of the joints between the bricks, the composition of the solution used, etc.But for the initial analysis is sufficient to know the price offer in the market solely on the basis of the first condition - the type of masonry.

Bearing walls

The professional construction environment, it is also called black brickwork.For its use not only of forming the brick, cinder block and concrete blocks.

She performed in several rows of bricks.Most often, this technology is used to form the load-bearing walls.The complexity of the process is in strict compliance with the design geometry.Even a small deviation of the wall could lead to a breach of the load distribution.

Depending on the materials used rough masonry is divided into the following types:

• Using reinforcement.It is necessary to reinforce the wall.
• Without reinforcement.It allows you to save on construction, but in some cases the impact on performance qualities.

Partitions

This is one of the most popular ways of building construction.The main frame is made of w / b construction which in its technical parameters in many ways superior to brick walls.But to form interior walls and partitions will be advantageous to use a brick.

thickness masonry

in a half-brick

In order to save building materials small internal partitions can be done in a half-brick.The specifics of this placement is the arrangement of the construction components - part of the stretcher is on the outside.However, this method is applicable only to a small area of ​​the walls.Otherwise, the probability of destruction.

The brick

stacking technology in a brick is almost completely similar to the above.The only difference is in the scope of work.

This technique can be applied not only for the construction of partition walls, but the walls and small structures.Depending on the possible application of conditionality reinforced mesh to reinforce the structure.

Installing bricks

Along with the construction of the wall partitions exist facing brick types.They perform several functions.Aesthetic - the facade gives the building a unique appearance.Practical - increases the thermal insulation of the building, it prevents the ingress of moisture into the interior of the main walls.

Facing the front of the house

price for this type of work depends on the size of the raw materials, the complexity of the pattern and the total area.It is important that after the laying of bricks facade acquired a unique appearance without loss of quality.