Fiberboard and particleboard - what's the difference of these materials ?The application features and tips

These sheet products have become popular in the private sector is largely due to the fact that respond well to treatment, and their installation does not differ any complexity.Plus - relatively low cost of production, which makes it accessible to a wide range of customers.But if the same fiberboard and particleboard in the application, and if not, what are the differences, understand not all.It often disappointing, as their use in the construction or repair without considering the specific characteristics of the proper result will not.

Home, and is a significant difference between the chipboard and MDF - the specifics of their production.Moreover, not unlike the technology itself, and in the feedstock which is used in production.The misconception that it is only one species of material, due to the fact that the basis of each sample is partially present (in one form or another) timber.But the similarities, in fact, comes to an end.

chipboard

stands for « Flake ».This material is the result of pressing the raw material mass consisting of shavings, chips, mixed with the resin (usually formaldehyde).And the mixture during compression it undergoes significant thermal stresses.

Features material

Such plates thicker MDF (50 mm), which allows them to withstand high mechanical loads.In everyday life is most often they are used for installation of "dry" screeds, strengthening of vertically oriented surfaces (with the obligatory "substrate"), as a basis in various designs.Of these, made cheap furniture and developing are partitions, racks, awnings, fences and the like.

main drawback - a few "loose" structure.This complicates the bond plates with each other or with other structural elements.Screws in the material "sitting" is not durable.It is therefore not recommended for use in the manufacture of chipboard temporary collapsible / folding design.Frequent disassembly / assembly causes damage to the areas where hardware is placed as a basis in this area begins to crumble.

Moreover, such plates require systematic surface treatment (e.g., lacquer) as well absorb moisture.They are not recommended for use outside of the buildings, in the open air or in areas characterized by dampness.

«Rigidity" sample does not allow, if necessary, to achieve even a slight bend them.Any attempt to lead to crack formation that restricts the use of multiple DSP.

fiberboard

Feature production was due to the full name - « Fibreboard ».Instead of the chip during preparation of the initial mixture used synthetic fiber + wood dust.Additionally, various polymers are introduced (additives), which determine the properties of the final product.For example, repellents (mainly paraffin, rosin) to improve moisture resistance of products.Application

components allows the smallest fractions prepared by compression (as a "hot") more thin sheets (2 to 10 mm).Their cost (per 1 m) lower than the ADI.

Features material

It is characterized by a higher density and higher moisture repellent properties, and in addition, a well-bent (within certain limits).Fiberboard sheets are often used in the furniture industry (for the rear wall of different cabinets, drawers as the bottom), in the manufacture of various containers and the like.

In everyday life, this material is often placed on wooden floors when formed between the boards large gaps, and their repair ( "relaying" cover) is not possible to deal with.As an option - arrangement of tiered ceiling.With self-manufacturing of door frame used for fiberboard sheathing.

garages in such sheets often get off with walls, gates, even the ceiling, allowing to "cover up" the gap and further insulate the box (especially iron).This product has high sound and thermal insulation properties, which is not true of the plates "particle".

Comparing these materials, to determine what is best does not make sense.Each different inherent only to it specific properties and for its own good.It is only necessary to take into account when buying, what these boards are designed.