Repair of damaged plasterboard with their hands

Despite the fact that the drywall - a material strong enough and reliable, over the life of it can come into disrepair.Cladding sheets may be damaged due to various reasons: leakage, chips from mechanical shocks, fire, etc. In addition, problems can arise as a consequence of non-compliance with finishing technology..
Damage and Repair Drywall
as any building component has its own weaknesses.With respect to this component, it can be argued that the most frequent problems associated with the operation are:
• cracks;
• chipped;
• hole.

Repair cracks in the wall

Cracks in the object of our discussion - is a common problem buildings.In 80% of cases, the purchase of new housing in only that the construction of the building, in the household there are similar problems.This is due to the shrinkage of the walls and support structures.

How to seal the crack in the drywall with your hands?If it is shallow and narrow, it will have little to deepen it, about 3-4mm.This is to ensure that the solution could gain a foothold in the deeper layers.Otherwise, it could simply fall off during drying.As a solution for sealing is better to use a special filler, designed specifically for drywall.It is able to retain elasticity over a long period and thus dries quickly.
If the damage is deeper, drywall repair in this case is complicated.First you need to remove layers of paint or other finishing materials at a distance of 10-15 cm from the place of fracture.Then apply a thin layer of glue, make better use of the PVA, and the top is glued fiberglass reinforced.After drying, the adhesive that secures the glass fiber, it is possible to apply putty and continue to finish: paint, taping, whitewashing, etc.

Repair chips on the wall

drywall repair their own hands when chipping is to bond the problem area.For this purpose, a special plaster tape.The damaged portion of the pre-trimmed and then attached the tape itself and the layer of putty.It is important that after the repair in the room was not draft or sudden temperature jumps to putty can properly dry and harden on the damage.
After drying, the area trimmed and glued wallpaper or painted to match.At this stage you need to take care of high-quality grinding to final finishing element was applied uniformly.Particular attention should be paid to grinding in the case when it comes to painting.If the paint is applied on the uneven layer, it simply disappear with time.

How to patch up the hole in the drywall

holes occur most often as a consequence of mechanical damage - a stroke or getting wet.If the same problem occurs in order to prevent further destruction of the entire sheet must be promptly repaired a hole in plasterboard with their hands.
For a start, inspect the section itself.The fact that the formation of the wetted around the material begins to deteriorate and becomes soft accordingly not possible to work with them.If there was a hit, as a result of which formed a recess perimeter may be "infected" the cracks, which is also not very good.
Once evaluated and determined the status area of ​​damage, it is necessary to reach a hard edge.Make a space from the edge of the hole in the 5-10 cm, depending on the severity.When using a ruler and pencil, draw a rectangle that will fit the size of the piece prepared for the closing.Cut the cracked element is best assembly with a knife or a special sawing.
Next drywall repair continues for a long time well-known scheme.You must first clean up the edges of the hole, and only then insert the blank.Be sure gruntuem surface.Strengthening produced using solution and mounting tape.
most important step in the repair of plasterboard with their hands - plaster
Surely you have noticed that when repairing damaged plaster is always used.It is actually a very important preparatory step in the repair and decoration.That is how will be performed qualitatively preparation for further processing will depend on the operational life period.Video shows in detail how to repair damage to the drywall with your hands.

Widget from SocialMart

Video for sealing the hole in the drywall

Select putty

in DIY stores in the choice of the consumer enough to offer a wide variety ofthis finishing material.We strongly recommend that you pay attention to the dry mixture.Firstly, they can be stored for a long time, without losing its properties, and secondly, they may be used in portions.In addition, pay attention to the fact that there are certain types of mixtures for walls, ceilings or repair.In our case, the right choice - this putty for repairs.
Dry mixes come in several types:
• polymer;
• Gypsum;
• cement.
choice depends on the type and conditions of the room in which the repair is made of plasterboard.When it comes to repairs in the bathroom or kitchen, with a high moisture content, then it is better to pay attention to the cement mixture.Plaster more suitable for dry warm place, but the polymer - are universal.They are more flexible and can be used anywhere.And although the price a little more, the cost of repairs is much less than the rest.
Regardless of what actions are carried out is carried out, repair drywall cracks, chips or seal holes before putty, apply a coat of primer.It promotes better bonding the surfacing material, while not itself penetrates into the sheet, thereby destroying it.The process of putty made after the base coat has dried.
main finishing process after the repair is carried out in several stages.First we need to apply fiberglass tape on the mounting repairs.It is important that joint damage found himself at the center serpyanku.After that you need to prepare putty.It should be noted that the preparation of the mixture produced in accordance with the required amount.Remember that a divorced dry mixture loses quality duration of storage, and after 30-40 minutes it becomes unsuitable for further use.
After this is done the very process of applying component restored site.To do this, use a spatula just two: slim and wide.Wide necessary for the application of the bulk and seal damage, slim stripper.Do not leave large stains and divorce - after drying them will be very difficult to remove.Try to apply the putty uniformly without depressions, bumps.Conclusion

drywall repair their own hands, regardless of the extent and severity of damage is possible even if, if you have never held in their hands the instrument.The main thing is to fulfill the requirements that have been mentioned above.The most important step in the repair of a coat, the correctness of the implementation of which will depend not only on the aesthetic component of the treated area, but also life.

method how to fix incorrectly drilled a hole in the drywall under Escutcheon