How to build a simple electric motor in the home ?

Step 1 - Prepare materials

To make the simplest magnetic motor with your hands, you will need the following materials at hand:

• battery at 1.5 volts;
• holder working with contacts for AA-batteries (as pictured below);
• small magnet;
• piece of enameled copper wire, 1 mm in diameter (for assembling need no more than 80 cm);
• 30 cm of bare wire with a diameter of 1 mm.

prepare all the necessary materials, you can proceed to the assembly of perpetual motor.Make a small electric motor is not difficult at home, what you now and see!

Step 2 - Putting home-made

So that instruction was understandable for you, better look at it step by step with pictures that will help visually understand the principle of mini motor.

1. enamelled copper wire you need to make the motor coil.To do this, we recommend to wind wire on the battery, leaving about 5 cm in length on both sides.It is considered good coil of 15-20 turns of copper wire.
2. Carefully remove the spool from the battery, and the free ends of the wrap at least twice across the bay, as shown in the photo.
3. sharp knife carefully strip the enamel from the ends of the wires to metallic colors.
4. Make holder for mini motor.All that is needed - to take a bare copper wire, bite him two flat length of 10 cm and cheat them a few turns on a thin nail to get this clip:
5. Collect all of the home-made engine in one piece.The basis will be the holder with battery.It is necessary to insert a paper clip, which will support the coil.At the very least you need to put the battery in the magnet coil and a little push a homemade motor.If you are able to make things right, the mini electric motor and will start to spin smoothly.It can be stopped only by removing the magnet.

immediately draw your attention to the fact that you can invent in their own self-made construction of a small engine.For example, here we give you some video lessons that may help you to make a version of the engine from the battery, copper wire and a magnet.

WordPress Photo Gallery Plugin

What if home-made does not work?

If suddenly you have collected a perpetual motor with your hands, but it does not spin, do not hurry to get upset.The most common reason for the lack of rotation of the motor is too great a distance between the magnet and the coil.In this case, you only need to slightly trim the legs, which holds the rotating part.

That's the whole assembly technology improvised magnetic motor home.If you have watched the video tutorials, you have probably seen that make the engine of batteries, copper wire and magnet with your own hands can be a variety of ways.We hope that the instruction was for you interesting and useful!
It will be useful to know:

• How to make USB fan at home
• How to pay less for electricity legally
• How to solder wires