Master class for creating a manual wall chaser

Simple homemade

For starters provide a simple illustrated instructions for the manufacture of wall chaser on the basis of Bulgarianwith his own hands.In this case, you will need to own a Bulgarian, an additional nut and two diamond disc on the concrete.

assembly consists of two simple steps, namely:

1. Install the first disc as usual, carefully pulling his nut.
2. After the nuts fasten another drive and again attract its nut.

draw your attention to one important point - if the thread is not enough for a full twisting a nut, it is better not to risk using a home-made.In this case, the nut can be used instead of the metal ring of the same diameter but smaller than the width of a set of goals.The latter option is convenient because you can make the most appropriate channel width depending on the section of cable.

That's the instructions for creating wall chaser on the basis of Bulgarian hands.The disadvantage of this embodiment is that dust is spread all around the room and deteriorate the work environment.It is therefore recommended to make a more modernized version - with a protective casing, which we'll talk further.

advanced tool

To all the dust at once disappeared during shtrobleniya walls, you can equip your homemade cleaner wall chaser.The suction hose is fixed on the cutting part, thus instantly picks up the so-called "dust cloud".Upgraded housing can buy, but you can make your own hands.In the first case, you will give a considerable amount of money on an item from a reputable manufacturer, so it's best to use the second option.

In order to produce a cleaner wall chaser, you need to take and consumables include fantasy.There are many ideas on the housing assembly of the metal pipe, durable fabric pots and even plastic container.Worth view photos ideas to gain inspiration and to make his own version of a casing with dust extraction:

draw your attention to the fact that the pipe must be installed on top of an improvised wall chaser, as shown in the drawing.This is due to the fact that the cutting wheel is rotated in the opposite direction and, again in this arrangement all the dust suction hose will be immediately removed from the work area.

If you do decide to make their own protective cover, it is recommended before the creation of the nozzle to measure the diameter of the hose from a vacuum cleaner, so that when mounting the tap sliding around and at the same time would normally go to the landinga place.Also, do not forget that for the connection of such a model of self-made electric wall chaser need two "points".In this case, we advise you to make an extension cord into two sockets.

Manual model for working with gas concretes

Well, the last thing I would like to talk about this topic - the use of special wall chaserfor aerated concrete and foam concrete blocks, which is a bit like a handsaw for wood.This tool allows you to easily make grooves for laying the cable in a relatively new building block. If your house is built of aerated concrete and you have decided to hold the wiring in the house, be sure not to waste your time on the production of home-made instrument, but simply buy a ready-made product from the manufacturer.The cost of the manual model does not exceed 500 rubles, a little, when you consider the amount of work throughout the dwelling-house.

Here we are told how to do their own hands from the wall chaser grinders and improvised.We hope that the information was useful and interesting for you.Be sure to check out video examples to learn about all the intricacies of the manufacture of home-made at home!

Related items:

• As Stroebe wall under wiring
• How to make a mini drill with his hands
• How to find a junction box in the wall