Modern ceiling lights - the top 25 ideas

Before we look at the main ideas and options for ceiling lighting, I would like to devote a little time requirements that apply to this issue.There should also be clarified that these requirements apply not only to the very scheme of arrangement of luminaires, but also their design and construction features.

So when electrical work you need to take into account the following requirements:

1. light should be evenly distributed throughout the area.
2. All fixtures (or each certain group) must have the same power of the light spectrum and intensity of the backlight.Otherwise there will be no harmony and interior noticeably worse.
3. lamps must be efficient, bright and at the same time durable.Leaders in this case are LED lamps.
4. If ceiling lighting is hidden, the body fixtures should be hidden in a special ledge.
5. Design lampshades (or other products) should be combined with the furniture and walls.
6. bulbs must not dazzle the eyes.To create a soft "filler" illumination, send the lamp up.To create a bright light lamp should look down.
7. All wires should be hidden.For concealed wiring harness track is hidden under the decoration of the walls.In an open wiring is necessary to hide it in the special cable channels (most often this option is used when installing wiring in a wooden house and garage).

most popular fixtures

most often for ceiling lighting in the house and the apartment can be used:

• chandeliers;
• spotlights;
• directional light lamps;
• LED and neon ribbons.

Consider the features of the use of each option.

chandeliers - this is a classic lighting option is not only the ceiling but also the entire room.Special requirements for them are not presented, the only - weight.This is due to the fact that when you connect certain types of ceiling chandeliers can not withstand the load and collapse (eg plasterboard).Luminous flux from these products is quite diffuse and bright, so in most cases alone chandeliers enough for the entire room, the advantage of these devices is their versatility - you can easily make the lighting a two-level, flat ceiling or even inclined (to use a hanging lamp in the chain).

Spotlights are the modern embodiment of the backlight.They are external and built-in type.The first option is better quality "fills" the surface of the light.We products has lots of advantages, the main ones are the easy installation and an attractive appearance.The disadvantage is that some light sources may damage the surface when heated.This problem often occurs with tension ceilings.

spotlights can illuminate a certain area, aslight output they are not scattered, and concentrated in one area.Most of these items are used to change the visual area of ​​the room.In addition to this directional light bulb can be used to illuminate certain portions of the room itself, such as kitchen work area.

LED and neon ribbons proven themselves during installation of the ceiling hidden lighting.Products are placed into prepared eaves and serve as decorative lighting the perimeter of the room.Today, LED strip is common to use in the kitchen, bedroom, hallway and living room.Bathroom due to high humidity is not suitable for these products.

also possible to illuminate the surface with lampshades, but they are rarely used.This is due to the fact that the light products stream in a dispersion of small radius and dimensions occupy a lot of space.

Options backlight

Today, there are plenty of options for the lighting of the ceiling with his hands.The main factor that determines the appropriate option - a design feature of the surface.In recent years, use of concrete, wood, suspended ceilings.

Suspended

Represents drywall constructions, mounted on the frame of the profiles.For illumination of the ceiling of plasterboard mostly used the installation spotlights.The articles may be installed in a spiral, and the contour number (it depends on the room).The lighting should be designed for the repair, at the stage of creating gypsum frame, asThis time you need to take care of the wiring to the installation of all the buildings.

can also be used for this type of mount chandeliers, the main thing just to choose the right way to fix the product.If the body is not heavy, it can be mounted to a concrete ceiling with a special hook or anchor dowels butterfly.For heavier chandeliers necessary to provide anchorage.LED strips are used if there is a special cornice flush lighting.In this case, a tape supply unit fits into it completely around the perimeter.

Tensioner

With lighting suspended ceilings, things are much more complicated.This is due to the fact that PVC tape is actually pulled, it has a low mechanical strength and thermal resistance.In other words, the film can not be attached fixtures, asunder such a weight of it immediately breaks.Even with the creation of a special attachment must also make sure that the lamp is not burned a film.This problem may occur when using incandescent lamps and galogenok.

Spotlights in this case proved to be the most successful, becausethey are attached to specially prepared seats, and the LEDs do not emit heat almost.It is best in this case to use a product such as outdoor, becausethey have passed on the light source.If you have already installed the hook under the chandelier, it is possible to make the ceiling illuminated by this lamp.All you will need - even with the repair hole cut in the film under the wires, connect them with a chandelier and hide under a decorative cover, which is provided in the kit.

When using LED strip lighting can do hidden stretch ceiling.In this case, still have a little below the level of the film to create a ledge under the tape.The material for the design chosen to your taste, but an easier option - polyurethane cornice.LED Tape has worked well to illuminate the multi-level ceilings, especially if it is combined with other variants of fixtures, for example, to the point.

Articulated lamp is recommended to install on walls, directing the light output upwards.

draw your attention to the fact that the stretch ceiling lighting is one feature.If the film is glossy, then all the lights will be reflected on its surface, and, as you know, visually their number will double.Sometimes this effect spoils the interior of the room.Also, the reflection effect on the interior, if the chandelier is dirty (it's just displayed) or if the LED strip is laid crookedly.

concrete / wood

wooden ceiling illumination is not specific requirements, as in the case of concrete.Of course, a chandelier, a lamp and direct light, in this case will feel confident, because the anchor (or anchor) is firmly "sit" in the ceiling.Stylish chandeliers are well suited for lighting the ceiling of wooden beams or trimmed clapboard.

As for point lights, then there is not advisable to use them, becausecomplicate installation work on the ceiling of wood.

LED strips can be used, but the process is similar to the previous installation - you need to think in advance and make a special curtain rod to dispense with chandeliers.The wooden house in the country you can even use wall lights, directed upwards, making a cozy atmosphere in the room.

Interesting ideas

Finally I would like to provide some interesting ideas for the installation of lighting in each room.

Corridor

Very often, the corridor of the apartment is a room inconvenient layout: narrow and elongated, small or in which there is no place to put even a wardrobe.In this case, visually correct the situation, you can use design techniques.For illumination of the ceiling in a narrow long corridor can be installed along the entire path of a few bright spotlights aimed straight down, which will visually shorten the room,

If you on the contrary, slightly increase the room, the product should be directed upward, as shown inpicture.

Kitchen

about lighting in the kitchen, we were told in detail in the relevant article.As for the ceiling is, it should be noted that it is best to use in this case, several groups of spotlights and LED strip.The latter will increase the space and create a creative interiors.

Bedroom

for ceiling lighting in the bedroom, you can use anything from lamps to floor lamps.If the bedroom is small with a low ceiling - direct lights up, illuminating the room from all sides.This idea will allow, as you know, increase the amount of bedrooms.

spacious bedrooms can be reduced by using light fixtures, aimed straight down the wall.In this case, the ceiling is darkened, and therefore - is omitted.

Living

Very often with the help of ceiling lighting in the living room create a "flavor" of the interior.For this purpose, LED ribbon and spotlights arranged in several rows.

Also in the hall can be used design chandeliers, lamps and sconces hinge directed upwards.For lighting in the living room hi-tech style can make lighting "starry sky", as shown in the photo above.

Bathroom

about lighting a bathroom we also talked, therefore it is advisable to study in detail the material.

The only thing that I would like to note - make sure that the bathroom was a bright light that will not contribute to the rejection of the shadows of objects, otherwise the process of shaving, bathing and applying make-up will be much complicated.Bright light in the bathroom can be achieved using special fluorescent lamps in waterproof housing.

Photo examples

To your attention the most original photo ceiling lighting in the house and apartment:

Related items:

• Whatdimmable LED lamp?
• How to hold the light on the balcony?
• How to make the lighting in the house?