Swimming pool with the film with his own hands

Pools on suburban areas has recently become a fashionable trend.Demanding people to conditions of recreation is becoming higher and higher.Moreover, often near the cottages are hard to find how some attractive pond.In the construction market is now a huge number of companies that are engaged in the construction of turnkey basins.However, to build a pool using a film with his own hands is also possible.

What types of swimming pools, suitable for suburban areas

two different types of pools can be used for the construction of cottages.One of them is a folding design of sheet metal, and the other is stationary, in which the cup is made of reinforced concrete.Collapsible structures have the advantage that they can be at any moment be disassembled and transported to another place quickly enough.Independently make a bowl made swimming pool is not a big deal.However, its inner lining will require the use of special PVC film.

Collapsible design has one drawback - it is not large, which does not allow the use of additional hydraulic engineering equipment.More difficult in the construction of a fixed pool, since it is necessary to prepare the construction site, develop the pit, pour a cup of concrete, which then still have to finish mosaic tiles or the same PVC film.Most often, the film used to protect the surface of the bowl.The main advantage of a fixed construction of swimming pools is its durability and reliability.In addition, the bowl shape and the depth can be selected arbitrarily.

If you decide to build a fixed pool with PVC film, the easiest way to do this without using the cup.It's enough to dig out the appropriate size and shape of the pit to the required depth.Its floor and walls need to align and place them on a layer of PVC film.All sheets of the cover are welded to each other.To the film does not hurt the bottom of the pit must be covered with a layer of sand.The edges of the film, which are located on the waterfront and need something to fix firmly.After that, it is necessary to refine the coastal zone and to install the necessary equipment.

What is PVC film for the pool and its variants

PVC film not only has an aesthetic function but also serves to create a waterproofing.This plastic products quite able to pass through the water itself, so the shelter of a concrete bowl Basin use other types of waterproofing is not required.Even if cracks in the concrete, such a film does not allow water to escape through them into the ground.

Due to such properties of PVC film are successfully used, if necessary, reconstruction of old pools, which appeared cracked or damaged waterproofing.Such a film can be placed even on the tile or mosaic, as it is easily stretches on the available material.However, you need to check each tile so that it is firmly fastened and not peeled off during the operation.

PVC films for swimming pools come in three different types, the choice of which depends on the presence and amount of cash, as well as consumer preferences:

• Not having a film reinforcement.This is the cheapest simple form, which is the thickness of 0.65-0.85 mm.This film does not have good mechanical properties, so it is used only to finish prefabricated swimming pools.
• film with reinforcement.This 1.5 - millimeter film in itself has an additional reinforcement layer of polyester yarns.The popularity of this film has earned for its ability to withstand severe mechanical loads without any deformation.The particular degree of strength makes it possible to use reinforced tape in the construction of concrete and concrete pools, walls of the cup which take on the task of supporting structures and must withstand the maximum water pressure.
• anti-slip film.It has a ribbed surface which prevents slipping on the surface of the pool.Such a film is often used for decoration of family swimming pools in which to bathe the children.

should also mention the PVC film with acrylic coating.This layer is a bactericidal barrier that prevents algae and bacteria colonize the micropores in the pool.Already proven in practice that the color stability, lifetime, maintaining elasticity acrylic film is approximately twice higher than normal.There are special membrane having a lacquer coating from a mixture of PVC and acrylic.Although this film is similar to a pure acrylic surface, it has a much lower efficiency.

PVC film benefits

pools The most important advantage of PVC film is its ability to not only arrange decorative pools and serve as waterproofing.It is very hygienic and resistant to temperature changes and UV radiation.Fine makes the effects of chemical agents for the care of pool recommended for her.This film has a lot of colors that mimic the depth of the sea.The manufacturer makes the film different shades of green, blue, blue flowers, which are able to illuminate the inside of the water, giving it a nice shade of sea water.Furthermore, there is a material that can simulate the mosaic beige-white blue-white and similar colors.

especially popular film has received for fast and easy installation to give the aesthetic surface, which has high waterproofing qualities in just a few hours.In addition, this material is relatively cheap and the work associated with its styling, is also not very expensive.

What disadvantages are present in the film for

pool Like any other material, PVC film for the pool has a number of drawbacks.Over time, its surface is covered by scratches, which sometimes result in rupture.Often the film loses the intensity of its color, but it will happen probably not earlier than 6 - 10 years of operation.After that, the film can be changed.Few surface appearance of the film pool spoil butt joints, which can be seen at a sufficiently close examination.Clean the film pool a bit more complicated than propylene or a mosaic.Do not use PVC film, if the placement of a hydraulic structure groundwater comes very close to the earth's surface.

main stages of work on the finishing of PVC pools film

Typically, PVC film installation made a team of professionals from the company's suppliers.Specialists use the special equipment and additional materials.However, owners often decide to pool their own to carry out all the work on the film installation, without the need for outside help.very difficult without special knowledge properly decorate the pool with their hands, but if you do everything according to instructions, it may well turn out a good result.

At the preparatory stage it is necessary to clean the pool, remove it from all the rubbish and clean the concrete surface.If the cup is not very smooth surface, it is necessary to plaster as on the walls and on the floor.This is necessary to ensure that the weight of the water film was not able to repeat the uneven surface of the bowl.

Then laid special insulation on the prepared surface of the pool.It will feel more comfortable in the pool, as well as reduce the friction of the film on the concrete, which significantly increases its service life.Pool, located in the room can be finished geotextile.It must be attached to the walls with screws using a special metal profile for the installation, which have the form of strips with a plastic coating.

the pool then the canvas PVC film raskraivajut in place so that it covers the entire surface of the floor and walls of the bowl.The joints between the pieces of the film solder special heating equipment.For welded seams are treated with sealant.Fixing film edges to the sides of the pool is made mounting profile, having the form corner or strip.Fixed film also in those places where there are ledges, for example, height or step differences.The film is then prihvatyvayut to the assembly profile.

pool water filling for the first time in the following manner.The first layer is poured into water, which does not exceed 30 cm in depth.During this vertical pull on the film layers.Then you need to top up the water to the required level and weld the film to the side.After that, the pool can be operated.

Thus, in order to get rid of any film PVC pool, you only need to have patience.Difficulties in this big no if there is specialized equipment and meticulous attitude to detail.PVC film is able to transform the gray concrete and force him to play with new colors of the sea depths.