Restoration of enamel bath - create a new cover with their hands

first stage of recovery bath enamel: surface preparation

Before you will be the restoration of enamel bath with your hands, you need to properly prepare the ground.To do this, clean off the old paint.Used in the process of work waterproof abrasive paper , and abrasive stone .It is important to treat each centimeter the bathroom as new enamel will be held only on the well-buffed surface.At this stage of the process will have to be given enough time and effort.

Do abrasive cleaning of stone using a standard sanitary powder (without chlorine), then wash it all.stripping process is repeated in the event that any remains rust irregularities.

Then the surface should be degreased, and allow time to complete drying.In that case, if chips are deep bath, then align (primed) them using the epoxy formulation.Use thus need appropriate tool.After all the work the foundation should be smooth.

Note! When undergoing renovations chipped enamel bath can be used not only epoxy composition, but also the composition of white glue or nitroemali Supercement.

Second stage: repair enamel bath

As already mentioned, the restoration of enamel cast iron bath is carried out only on well prepared surface.When this stage is complete, then proceed directly to the restoration.Use a cloth with a swab or a brush made of natural hair.The first tool is considered more preferred as the second embodiment, the surface may accidentally get the hairs of the brush.

Restore enamel cast iron bath with his hands occurs in several stages.In this case the desired temperature should be about 20-23 ° C (most favorable drying).Apply the first layer, which under the right conditions, should harden within a few hours. second layer coated surface after 36 hours. However, the complete drying of the coating (regardless of how many layers have been applied) only after 7 days.

means for recovery bath may be either enamel aerozolevom in the can, and the can in the package.Many experts argue that the first option makes it much faster to coat.Moreover, the composition does not form cracks and delaminations.But the life of aerozolevyh mixtures is much less, because they contain a large amount of solvent.Precisely because it is also worth paying attention to the money in the can package.

Once the new coating is applied, and the bath is ready for use, it is necessary to perform a number of recommendations.First, do not use detergents, having in its composition acidic or abrasive substances.For example, should be excluded from everyday use Pemolyuks, Comet. Secondly, in renovated baths is not advisable to soak the laundry and use bleaching compositions.Simply use special pots or washing machine.

Recommended enamels and lacquers

If you no longer tormented by the problem of how to restore the enamel baths, but there is a question - what is better to use varnishes and enamels during the operation, it will give a list of some recommended formulations.Set Svetlana for self-renewal of the entire coating has the form of a two-component paste-like composition not only provides enamelling, but also the alignment of the surface.

also popular complex for recovery Aqua-color, which is great variety of repairs chipped and cracked.Of the foreign compounds can be recommended Tikkurila Reaflex 50 - two-component epoxy paint, it is used not only for bathing but also for swimming pools.Enamel STACRIL ECOLOR-1 used to restore the bath by pouring.