How to connect a gas stove yourself

Installing a gas stove

The first thing that should never be forgotten, it is orderly.Otherwise, if you do not believe in it, it makes sense to hire a specialist for the work that you give is not a small sum, and no longer want to use its services.

Second - this is self-confidence.If not, contact your webmaster.That he will know what requirements have to be installed and that it is necessary to pay attention.Find a specialist to help you offer to your home gas service.

If the installation will perform the gas service worker, your costs will not be so great, it is important only to wait for their turn, the arrival date of the master.The worker will come and take care of that, so the warranty card and all the relevant documents were in order and filled.In any case, if none of the options does not suit you, you must proceed to the installation yourself.

Proper documentation

How to connect the gas plituv consent of all the documents?
Each installation requires a paper component:

1. Documents in the possession of the premises.
2. state registration.
3. Certificate of family composition.
4. Treaty donation and purchase and sale of the premises, if any.
5. Sponsored subscription receipts and passport book on the counter.
6. Maintenance.
7. passport at home.

Self-plate connection on

instructions An important point in the installation: it guarantee denoted far from the installation, and the date of purchase in the store, and when she stood in your garage year, keep in mind that there maybe consequences.And before connecting the gas hob, check how long the guarantee it has.

1. Where is?
   cleaning the device from the package, setting the regulation feet, is to put it on the prepared area.It is necessary that between the stove and the wall was a gap, which is defined by the instruction.

   

   gas stove set with the help of a spirit level horizontally.Also set 4 feet, so that the device is stable standing even to the wall.

2. What are the necessary tools?
   ustanovkineobhodimo to have a pipe wrench 1 open-end and an adjustable wrench.We also need a brush and shaving brush, soap emulsion for quality control.Besides it is difficult to install without gas hose, which must be in perfect condition and have a ball valve.To properly connect the rubber hose pipe must purchase a sealant for sealing, eg for plate Hephaestus suitable thread sealing tape or Loklayt 55 Thum.
3. How to disable the old stove?
   First, cover the gas valve and turn off the hotplate.If the valve is blocked, but it is made according to the old standards, it should be replaced by a ball, because it is much easier to use.It is necessary that at hand has been sealing tape, which is suitable for tap changer.
   The chart below shows some of the details of each member of the kitchen gas reducer.

   

4. How to connect a gas stove and hoses to it?
   self-installation devices can be provided with a flexible hose made of rubber.Optimum length - 3 meters, but is from 1 to 5. A flexible hose for installation is optimal since it allows to move the slab when necessary, and it would guarantee safety from gas leaks.

learn how to properly connect the stove, clear and understandable shown in the video below.Study and subject to safety, get to work.Good luck to you!