As the home to make plasterboard houses

Plasterboard ceiling as

basis of GCR are regular gypsum cardboards and paper, drawn up in a single homogeneous sheet of a standard size for most manufacturers.The fabric structure "sandwich".Sheets gypsum cardboard is placed between the layers.

multi-layer cardboard has a sufficiently high strength properties with good thermal insulation.If you want to perform a quick repair of the ceiling plasterboard, versatility allows its properties to use different frame and frameless techniques of performance.Separately need to say about hygiene and safety for human health of the GCR.

To increase resistance to moisture cardboard may be impregnated with a special water-repellent additives.Such techniques, provided additional security measures allow for installation of drywall on the ceiling in rooms with high humidity modes of operation.

When producing dough sheets are placed in a special plaster and fiber supplements.This creates several reinforcing effect and increase the overall strength of the sheet material.However, all kinds of GCR easily processing techniques (sawn, cut with a knife), they can be given virtually any shape, combined in various combinations with other materials.

Multilevel ceiling drywall finishing, using a variety of luminaires and entire lighting system capable of drastically transform the most ordinary room.Special "arched" types GCR provide an opportunity to perform the finishing of openings in the form of arches, again became very popular in interior design.

main characteristics in plasterboard finishing

Speaking about the merits of the material as a whole, can be said about the need for additional measures to protect the base of the sheets from moisture.Gypsum is hygroscopic, readily absorbs and releases moisture, so the installation of plasterboard ceiling and its application in the decoration, in addition to the direct protection of surfaces against water, requires the organization of additional ventilation.

structure should be aired, "breathe", giving excessive moisture.However, in certain cases, the ability to accumulate moisture and bend in the wet state is more dignity.These techniques use in the formation of arched sheeting.

Along with the processing ease, at low altitude, premises and subject to the flat surfaces of the drywall to the ceiling mount can be performed without the use of frame structures directly on the substrate using special mastic adhesives.

This ensures reliable and smooth surface, ready for the final finish quality.Cardboard base allows us to apply a new surface almost all types of finishes.

But more often the unit from the ceiling drywall is to use specific frame systems.The material of manufacture may serve as a piece of wood or a rake.The main condition - the stiffness and strength of foundations.The most versatile and easy-to-use systems are metal carrier profiles.

Having all the necessary elements, ease of connections, the size of the processing, allows you to collect skeletons of diverse complexity.In fact, sheets and profile sets up complete systems for finishing drywall.Finally, using the ceiling plasterboard profile, you provide tangible savings.profile sets are responsible for the strength that withstands the weight cladding, lighting, other attachments.

In fact, plasterboard ceiling is suspended, and very often in the space of podpotolochnye put different communication.Therefore cold profiles have a box-like shape with three ribs on the side flanges for secure fixing (often latch type), perforated for fasteners and communication routes.

In addition, kits are supplemented by reliable hangers, brackets and adjustable suspensions with latches, power extension cables, connectors, and so forth. All profiles types easily cut and drilled, are interchangeable, their sizes make it easy, making a typical frame structure, how to make plasterboard, soand plasterboard finish for walls and partitions.

main ceiling installation rules of plasterboard

There are profiles of rails, racks and carriers (easily inserted into the guide).To work with such sets of frame elements needed for metal scissors, tape measure, ruler, square, screwdriver with nozzles (it is important that the direction of rotation of his head switched).It is more convenient to use the battery option instrument.

If you have already decided to install plasterboard, how to do this operation tell our article.So, work on the device are carried out in several stages.First preparations for the markup.The walls and ceiling are cleaned and, if necessary, strengthened Shpatlevanie.For marking of wall frame profiles using a builder's level (preferably water), pneumatic cord tape (length should be capable of measuring without intermediate elevations), plumb meter (folding or roulette), a square building, the marker.

slugger level line of wall mounting profile.His fixation on the perimeter of the premises carried out on the anchors using an electric drill or punch with the corresponding function.Step attachment depends on the load (standard - 0.6 m).

During the set frame chosen design fastening profiles is carried out on the screws - "flea" or "bugs." Fastening sheets is carried out using the screwdriver with a restrictive nozzle prevents damage cardboard layer.The head of the screw should come flush with the surface.

hardware length must provide mounting depth of less than one centimeter.Step attachment - not more than 0.25 m (0.2 m in average).Generally, the required number and type of fasteners calculated according to the size of the room, the number of brackets (4 screws on each), the number of layers of sheets, follow the prerequisite joints alternation.