Sawing jigsaw - learn carpentry literacy

Sawing jigsaw - new opportunities

With the development of building technology there are new materials and tools.Power tools can significantly facilitate the work of the master builder or home, and some of the work can not be done at all without its application.One such tool is a jigsaw.

Woodcarving jigsaw may require the presence of the tool mode pendulum stroke paintings.This means that while the fabric does not only reciprocating motion up and down, but also as if sawed material in front of him.

Use a pendulum stroke is recommended only if you want to make a straight cut.With this tool, if necessary webs can be made straight and patterned cuts in many materials: different kinds of wood, brick, glass, ceramic tiles, non-ferrous metals, plastics, plasterboard, steel (even stainless) and others.

Sawing is changing very quickly, unlike ordinary hacksaw.Figure jigsaw sawing wood has risen to new heights with the introduction of this tool.Use the jigsaw to cut inside details can be holes, and cut at an angle.

What we should remember before working master?

consider how to cut jigsaw.First of all, make sure that you have even got a new saw blade sharp.On sale there is always a wide range of different fabrics.Dull fabric will greatly burden the engine, which is not recommended, and the edges are obtained ragged.

further required to fix sawn billet. If the item is well fixed, will cut accurately and precisely. If the cut is not necessary to press on toward the jigsaw cut, you need him to go free.If you still have to push, then a blunt blade.

Cut is necessary not for marking lines, and next to it, it will make the cut more accurately.If possible, it is necessary to put the blank side facing down.Stroke occurs when the fabric moves up, respectively, cut with the bottom of the detail will be more accurate.

thread jigsaw angle made when fixing the base plate to the desired position.On most models, you can set the angle of the cut 15, 30, 45 degrees.First, better to cut unnecessary board to check the angle protractor, and then proceed to the finishing option.

sawing wood jigsaw has the undoubted merit of which is that the processing of thin or sensitive workpieces cuts out very good quality, free of burrs and jagged edges.

How to behave in the process of cutting out jigsaw?

Before jigsaw to cut the spheroidal shape in detail, for example, a hole for the correct handle, you'll first need to drill it with a drill to fit the canvas.Then you need to insert the blade and turn the power on.It is necessary to hold the cut part to the canvas did not eat.

When working with this tool must comply with certain safety regulations.Before sawing jigsaw, you must make sure that the power cord everywhere insulated.Avoid direct contact with the web jigsaw.The cloth should correspond to a certain type of material being cut.

When the need to use protective eyewear, as is to bend over to get a better look cutting line as the dust will get into the eyes, so that you can injure yourself or damage the cut.

Before you use the jigsaw, read the instruction manual and maintenance of the instrument.Lubricate and clean your instrument, it is a guarantee of its long and faultless work.