Mosaic tiles bat - creativity and non-waste production

little about mosaic

This type of decoration is suitable for different interiors, can be used for decoration of kitchens, swimming pools, toilets, lobby, shops, garden paths, and even offices.Tiled mosaic almost universal form of decorative finishes.It can stand for years in the sun, cold or water, and do not lose the original look, perhaps for that and appreciated.

Mosaic tiles with their hands will help create unique motifs and unique masterpieces.At first glance it may seem that the pieces of the tiles can be laid bat as necessary.But before you make a mosaic of tiles, it is necessary to examine some rules for its installation.Compliance with these rules will give strength and symmetry of the mosaic.

Preparation for laying mosaic tiles

technology tile mosaic bat will be considered in this article as an example of laying the garden path.The first thing to know is that you should use large pieces of tile bat, in which at least one end of the line for the laying of the outer edges of the track.Smaller fragments are needed for the track center, and the pieces of irregular shape is required to fill the voids between the parts laid out.

Surface garden path depends entirely on the availability of raw material and the imagination of the master.Mosaic tiles bat with his hands begins with sorting the fragments in shape, size, and if on the track requires a certain color scheme, then the color.To all the elements at hand, you need to expand the assorted pieces near the site of installation.

should now move on to prepare the grounds for a future garden path of the mosaic.To do this, remove the top layer of soil and a well-compacted bottom layer.Leveled surface layer of sand, which is then carefully compacted.Next are driven into the ground pegs along the perimeter of the site, and between them at the desired height marker stretched nylon cord.

What to remember, laying mosaic?

Mosaic is laid in cement mortar, which is evenly distributed over the place of installation.After the cement foundation of a little grab, you can proceed to the mosaic laid out.If tiling is performed on the already completely frozen cement base, then you need to use the tile adhesive frost.If a mosaic picture is too complex, it is best to expand it on any plane.

along the cord around the perimeter of a large fixed fragments with smooth edges.Pieces of tile should be lightly pressed against the base of the rotating motion.After the tiles firmly into place, you can begin the installation of the following elements of the mosaic.

With the construction level is necessary to constantly monitor the horizontal or bias, if any.After placing elements along the perimeter, to start assembling large fragments of irregular shape in the middle of the track.Free space between large pieces filled with small fragments of irregular shape.

To align the tiles laid horizontally after installation, you must put a wooden block on a track and tapping it with a hammer, displaying all the tiles in one level.

Clearances and the joints between the tiles should be shed grout.This will give the entire strength of the coating.As can be seen, with the possession of certain knowledge and skills mosaic tiles with their hands fit very simple.