Artificial facing stone - all the details of this decorative material

Artificial facing stone, what is it?

Artificial stone finishes appeared relatively recently, and has become massively used only in the nineties of the last century.Initially, it was used exclusively for lining caps buildings, but today its scope has expanded, and it is used to decorate fences, terraces, facades, interiors and grottoes.Such popularity is due to the material of its affordability, ease of installation and excellent technical properties.

What is an artificial decorative stone cladding?At its heart are polymer concrete, cement, various resins and other binders.To enhance material used polymers that increase the fortress and other characteristics. Note!Choosing the material, you need to learn about its composition, because the substance can be included in it, are harmful to the environment.

The manufacturing process is as follows: in the form of the composition is poured and left so as not withered.The result is a tile on one side flat and the other is exactly the same shape, color and texture of natural stone.The quality of the product affects not only the material, but also a form that is used.Dimensions artificial stone range from 0.5 to 5 square meters, and its thickness - 1-2 centimeters.The thickness of the stones that mimic stones, can reach up to 10 centimeters.

properties and characteristics

material on the appearance of the decorative stone is directly influenced by the natural, which is traditionally used in construction.It is unlikely that once the artificial material to replace natural, but it has many supporters at very reasonable reasons:

• Decorative stone more aesthetic.The natural material has a limited color range, which does not fulfill all your design ideas.Artificial material also can be produced in any color, even this did not occur in nature;
• Natural stones are radioactive background, fine - no;
• its sleek form, there is no need to cut and dub side for mounting;
• weight well below the weight of a natural material that allows you to start lining without strengthening the walls;
• Additional insulation, which, in principle, the wall thickness of 60 centimeters essentially does not affect the noise level.

Scope of the decorative stone is practically limitless.This material, which gives the designer, architect or future owner complete freedom to thinking through design.Due to its characteristics, artificial cobblestone ideal for walls, facades, columns, loggias and so on.No major restrictions on where and what kind of stone used, does not exist.However, we should not forget that this material is required to emphasize the dignity of a building or a separate room, so do not overdo it with him much.

Note!Often the decorative stone is used for the restoration or renovation of buildings.

How to choose?

Deciding to buy for finishing the material, you must know how to choose and what to look for.Firstly, it is appearance.The surface should contain as many different tones and transitions, then it will look natural.In nature, a very rare one-color stones, so these are not recommended to buy.Secondly, the technology of production.It is better to buy products of domestic production, as they are made in view of our climate.

Third, it is necessary to take into account the body of cobblestone.It should not be more than 5 mm particles, as in this case the surface is uneven, and the danger of cracking rises.Check it best to SPIL material.Proper distribution of the components should be: at the rear of the filler is easy, and the front - a solid, which creates a strong protective layer.

Note!Not less important is the packaging.It should be comfortable for a comfortable delivery of materials to the place of work.